Pharma Test PTB 311E三合一药片测试仪
手动药片测试仪PTB 311E是双力模式硬度测试仪，因为它可以用于线性力或线性速度增加，同时测试片剂硬度。它为内置数字称重传感器提供多点验证程序。双力模式仪器具有线性速度增加和线性力增加模式。
超过18年，所有Pharma Test硬度测试仪器都可以选择线性力或线性速度增加。线性力增加是推荐的设置，因为它提供精确的控制，因为增加率直接由用于读取力的电子称重传感器控制。
——产品特点——
● PTB 311E完全符合USP <1217>和EP <2.9.8>
● 三合一硬度仪可准确测量片剂厚度、直径（长度）和硬度三个参数，可关闭尺寸测量
● 硬度测量可采用恒速和恒力两种方法
● 可统计250个样品，连接打印机可输出详细测试报告和统计报告
● 自动重新开始功能保证了高通量
● 连接打印机可直接打印结果
● 内置认证和校准程序
——技术参数——
● 测量参数：厚度，直接（长度）和硬度
● 测量模式：恒力法，恒速法
● 硬度测量范围：2—300N（500N可选）
● 可选硬度单位：N，Kp，Sc
● 厚度测量范围：2—15mm（26mm可选）
● 直径测量范围：2—40mm（75mm可选）
● 接口：RS232，打印机接口
● 全不锈钢机身
● 标配IQ和OQ文档
The manual tablet testing instrument PTB 311E is a dual force mode hardness test apparatus as it can be used for either linear force or linear speed increase while tablet hardness is tested. It offers a multiple point validation procedure for the built-in digital load cell.
For more than 18 years all Pharma Test hardness testing instruments offer the possibility to select either linear force or linear speed increase. Linear force increase is the recommended setting as it offers the most accurate control, as the rate of increase is directly controlled by the electronic load cell used to read the force.
● Select either linear force or linear speed increase (dual mode selection)
● Steppless adjustment of the force or speed increasing rate
● Entry of time and date
● Enter a 12 digit batch number
● Automatic re-start facility to speed up the testing sequence
● Documentation of all results using a separate Dot-Matrix or PCL5 printer
● Validation and calibration program for the measurement station
● Force curve print-out
● Dual point adjustment of the load cell for the hardness test station
● Multiple point validation (calibration) up to 30 or 50kg
● Programmable print-out of force increase curve
● Data transfer via RS-232 interface
● Hardness testing in compliance with the EP <2.9.8> and USP <1217> Pharmacopoeia
● Test program for soft gelatine capsule testing by setting up a testing distance
|
