Thermo Scientific™ Nalgene™ 带 PTFE 滤膜的 50 mm 在线针式过滤器DS0222-0020

Thermo Scientific™ Nalgene™ 带 PTFE 滤膜的 50 mm 在线针式过滤器DS0222-0020

价格: ¥595 - 60413

品牌:Thermo Scientific™ Nalgene™ 带 PTFE 滤膜的 50 mm 在线针式过滤器DS0222-0020

货号:DS0222-0020

收藏

产品详情

相关推荐

库存 :Thermo Scientific™ Nalgene™ 带 PTFE 滤膜的 50 mm 在线针式过滤器DS0222-0020

保修期 :Thermo Scientific™ Nalgene™ 带 PTFE 滤膜的 50 mm 在线针式过滤器DS0222-0020

规格 :DS0222-0020/DS0222-0045/DS0390-0070/DS0399-0001/DS0399-0002/DS0345-0001/DS0405-0050

Thermo Scientific™

Nalgene™ 带 PTFE 滤膜的 50 mm 在线针式过滤器



相关应用: 
 

Laboratory Plastics and Supplies

使用 Thermo Scientific™ Nalgene™ 带 PTFE 滤膜的 50 mm 在线针式过滤器过滤腐蚀性化学品,包括酸和非水性溶剂,例如 GC 和 HPLC 中使用的那些化学品。也可用于空气和气体的无菌过滤。 为台式发酵罐的无菌排气提供了优异的屏障,或保护真空泵以免受潮。可高压灭菌。


  联系我们获取支持 ›
  货号 单位规格 孔径 单价 (CNY) 库存状态 数量
  DS0222-0020 Case of 10 0.22μm 1,997.16
Your price:Sign In
***
完整参数 ▼
消毒 Non-sterile
类型 Syringe Filter
外径直径(公制) 50mm
孔径 0.22μm
每包 数量 10
每箱数量 10
滤膜 PTFE
Diameter (Metric) Membrane 50mm
Unit Size Case of 10
  DS0222-0045 Case of 10 0.45μm 2,065.31
Your price:Sign In
***
完整参数 ▼
消毒 Non-sterile
类型 Syringe Filter
外径直径(公制) 50mm
孔径 0.45μm
每包 数量 10
每箱数量 10
滤膜 PTFE
Diameter (Metric) Membrane 50mm
Unit Size Case of 10

添加到购物车
保存到列表

产品概述

Recommendations


返回顶部
适用于台式发酵罐、用于无菌空气或 CO2 的在线气体过滤及保护真空泵免受水溶液的损害。也设计用于过滤腐蚀性化学品和溶剂,例如在 GC 和 HPLC 中使用的溶剂。
  • 样品容积大小:0.2 至 5.0 L
  • 入口/出口:阶梯式软管倒钩适合 0.25 至 0.375 英寸(6 至 9 mm) 内径的管路
  • 0.2 和 0.45 μm 孔径
  • 可高温高压灭菌
  • 聚丙烯外壳

有限保修期:根据我们的《销售条款和条件》中确定的所有保修要求和除外条款,此产品从产品运输之日起享受九十(90)天保修。

内部研究使用限制的免责声明:买方将本产品用于内部研究用途的任何限制仅仅不适用于与此声明有关的网页上的产品。


‹ View less
Disclaimer to internal research use restriction: Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.


Thermo Scientific™

Nalgene™聚碳酸酯灌注钟罩



相关应用: 
 

Laboratory Plastics and Supplies


Thermo Scientific Nalgene聚碳酸酯灌注钟罩用于从大型容器向培养基瓶或培养容器中无菌传输无菌培养基。

可高温高压灭菌的灌注钟罩是将无菌培养基传输到小型容器或瓶中的理想工具。


  联系我们获取支持 ›
  货号 单位规格 描述 单价 (CNY) 库存状态 数量
  DS0390-0070 Each Overal height w/adapter: 114mm; Bell I.D.: 70mm 607.89
Your price:Sign In
***
完整参数 ▼
内径直径(英制)内径直径(英制) 2.875 in.
内径(公制) 70mm
高度(公制) 114mm
描述 Overal height w/adapter: 114mm; Bell I.D.: 70mm
物品描述 Overal height w/adapter: 114mm; Bell ID: 70mm
Unit Size Each

添加到购物车
保存到列表

产品概述

分析证书(COA)

Recommendations


透明、可高温高压灭菌的灌注钟罩适用于大多数普通培养基瓶。
  • 无毒性聚碳酸酯不会破碎
  • 钟罩边缘经滚边处理,强度更高
  • 配有可高温高压灭菌的聚丙烯管道接口,可连接内径0.25、0.375和0.5ft. (6, 9, and 13mm)接管
  • 钟罩内径2.875ft. (70mm)
  • 无滴漏内部灌注管长度为2.5ft. (63mm); 外径0.375ft. (9mm); 内径0.25ft. (6mm)
带管道接口时的总高度,4.5ft. (114mm)。
Limited warranty period: Subject to all warranty requirements and exclusions set out in our Terms and Conditions of Sale, this product is warranted from the date we ship the product and for ninety (90) days thereafter. Disclaimer to internal research use restriction: Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.


Thermo Scientific™

Nalgene™不锈钢镊子



相关应用: 
 

Laboratory Plastics and Supplies


Thermo Scientific Nalgene不锈钢镊有弯头和直头两种规格可选。
  联系我们获取支持 ›
  货号 单位规格 尖式 单价 (CNY) 库存状态 数量
  DS0399-0001 Each Bent 595.97
Your price:Sign In
***
完整参数 ▼
尖式 Bent
每包 数量 1
类型 Forceps
Unit Size Each
  DS0399-0002 Each Straight 631.75
Your price:Sign In
***
完整参数 ▼
尖式 Straight
每包 数量 1
类型 Forceps
Unit Size Each

添加到购物车
保存到列表

产品概述

Recommendations

  • 不锈钢
  • 自闭设计(弯头镊)
  • 锯齿状的夹持区域
  • 可高压灭菌

Disclaimer to internal research use restriction: Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.

Thermo Scientific™

Nalgene™ Vacuum Manifold



   
相关应用: 
 

Laboratory Plastics and Supplies

Allow for easy funnel manipulation with the widely spaced outlets of the Thermo Scientific™ Nalgene™ Vacuum Manifold. This stable benchtop unit is made of high quality stainless steel and has three vacuum outlets each with leakproof† two-way valve and vent port.


  联系我们获取支持 ›
  货号 单位规格 描述 单价 (CNY) 库存状态 数量
  DS0345-0001 Each Vacuum Filter Funnel Manifold 27,515.52
Your price:Sign In
***
完整参数 ▼
描述 Vacuum Filter Funnel Manifold
物品描述 Vacuum Manifold
Unit Size Each

添加到购物车
保存到列表

产品概述

Recommendations


Features
  • Outlets spaced for easy manipulation of individual filter funnels
  • Teflon™ stopcock on each valve shuts off flow when fewer than three outlets are used
  • Ideal for use with Nalgene reusable filter funnel with clamp
  • For use with Nalgene analytical filter funnels or Nagene test filter funnels

Includes:

Three vacuum outlets, each with two-way valve and vent port; hose barb vacuum connector for 0.38″ (9.5mm) I.D. tubing.

Note:

These tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.


‹ View less
Limited warranty period: Subject to all warranty requirements and exclusions set out in our Terms and Conditions of Sale, this product is warranted from the date we ship the product and for ninety (90) days thereafter. Disclaimer to internal research use restriction: Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement. † The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted, withstand air pressure of 2psig for 2 minutes, and no water escapes;. b) Bottle/funnel/flask closure systems of larger than 100mm after they are filled with water, inverted for 15 minutes, and no water escapes.


Thermo Scientific™

Nalgene™ 起泡点测试设备



相关应用: 
 

Laboratory Plastics and Supplies


Thermo Scientific Nalgene 起泡点测试设备无需从过滤装置卸下滤膜,即可测试过滤装置的滤膜的起泡点。

非常高效的方式,用于测试 Nalgene MF75 系列过滤装置或顶瓶过滤器,有助于确保产品的完整性。


  联系我们获取支持 ›
  货号 单位规格 描述 单价 (CNY) 库存状态 数量
  DS0405-0050 Each For all 50, 75 and 90mm MF75 filter units and bottle top filters 60,413.10
Your price:Sign In
***
完整参数 ▼
描述 For all 50, 75 and 90mm MF75 filter units and bottle top filters
每箱数量 1
每包 数量 1
物品描述 For all 50, 75 and 90mm MF75 filter units and bottle top filters
Unit Size Each

添加到购物车
保存到列表

产品概述

Documents

分析证书(COA)

Recommendations

  • 铸铝材质
  • 测试50、75和90 mm Nalgene 过滤产品的起泡点
  • 不包括校准仪和压力源
  • 可接受内径为0.25英寸(6毫米)的软管
转接头和 O 形环
Limited warranty period: Subject to all warranty requirements and exclusions set out in our Terms and Conditions of Sale, this product is warranted from the date we ship the product and for ninety (90) days thereafter. Disclaimer to internal research use restriction: Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.

上海辅泽商贸有限公司

实名认证

金牌会员

入驻年限:7年

联系人:郑经理

地址:上海

电话联系

购买咨询

换一个