产品详情
文献和实验
相关推荐
克隆性 ：Polyclonal
适应物种 ：human, mouse, rat
保质期 ：发货周期：现货
库存 ：9999
供应商 ：博士德生物
应用范围 ：WB, IHC, IHC-F, ICC, IF, FCM, ELISA(CAP)
规格 ：50μl/100μl/150μl
产品概况
| 货号 | PB9051 |
|---|---|
| 产品名称 | Anti-CD23/FCER2 Antibody |
| 基因名 | FCER2 |
| 抗体来源 | Rabbit |
| 克隆 | Polyclonal |
| 抗体亚型 | Rabbit IgG |
| 分子量 | 45KD |
| 免疫原 | E.coli-derived mouse CD23 recombinant protein (Position: E50-P331). Mouse CD23 shares 52% amino acid (aa) sequence identity with human CD23. |
| 内容 | 500 ug/ml antibody with PBS ，0.02% NaN3 , 1 mg BSA and 50% glycerol. |
| 纯化方式 | Immunogen affinity purified. |
| 浓度 | 500 ug/ml |
| 产品形态 | Liquid |
| 保存条件 | 12 months from date of receipt，-20℃ as supplied. 6 months 2 to 8℃ after reconstitution. Avoid repeated freezing and thawing. |
| 背景资料 | CD23, also known as Fc epsilon RII, or FcεRII, is the "low-affinity" receptor for IgE, an antibody isotype involved in allergy and resistance to parasites, and is important in regulation of IgE levels. There are two forms of CD23: CD23a and CD23b. CD23a is present on follicular B cells, whereas CD23b requires IL-4 to be expressed on T-cells, monocytes, Langerhans cells, eosinophils, and macrophages. As part of a mapping of multiple probes to specific bands on chromosome 19 by fluorescence in situ hybridization, the FCE2 gene was assigned to 19p13.3. CD23 (FCE2) is a key molecule for B-cell activation and growth. It is the low-affinity receptor for IgE. The truncated molecule can be secreted, then functioning as a potent mitogenic growth factor. |
| 研究类别 | 1. Lichtman AH, Abbas AK (2003). Cellular and molecular immunology. Philadelphia: Saunders. pp. 324–325.2. Weskamp, G., Ford, J. W., Sturgill, J., Martin, S., Docherty, A. J. P., Swendeman, S., Broadway, N., Hartmann, D., Saftig, P., Umland, S., Sehara-Fujisawa, A., Black, R. A., Ludwig, A., Becherer, J. D., Conrad, D. H., Blobel, C. P.ADAM10 is a principal 'sheddase' of the low-affinity immunoglobulin E receptor CD23.Nature Immun. 7: 1293-1298, 2006. |
| Uniprot ID | FCER2: P20693 |
| 推荐配套的二抗和检测试剂 | Boster recommends Enhanced Chemiluminescent Kit with anti-Rabbit IgG (EK1002) for Western blot, and HRP Conjugated anti-Rabbit IgG Super Vision Assay Kit (SV0002-1) for IHC(P). *Blocking peptide 可以联系我们购买。 |
产品应用细节
博士德对每一批抗体都用没有转染过的细胞系和体细胞组织检测，以保证博士德出品的抗体有足够的亲和性足以和对应蛋白天然的表达含量起反应。
| 应用 | 稀释度* |
|---|---|
| Western blot(WB): | 1:500-2000 |
| Immunohistochemistry in paraffin section (IHC): | 1:50-400 |
| Immunohistochemistry in frozen section (IHC-F): | 1:50-400 |
| Immunofluorescence (IF): | 1:50-400 |
| Immunocytochemistry: | 1:50-400 |
| Flow cytometry (FCM): | 1-3 μg/1x106 cells |
| ELISA(Cap): | 1:50-1:200 |
| (Boiling the paraffin sections in 10mM citrate buffer,pH6.0,or PH8.0 EDTA repair liquid for 20 mins is required for the staining of formalin/paraffin sections.) Optimal working dilutions must be determined by end user. | |
*最佳稀释度需要用户自己调试，此处数据仅供参考。
**博士德提供高敏感的二抗和检测试剂盒。详情见相关产品推荐。
产品图片描述
点击图片放大
[list_product_images]Figure 1. IHC analysis of CD23 using anti-CD23 antibody (PB9051).CD23 was detected in paraffin-embedded section of Human Tonsil Tissue. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/ml rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC)(Catalog # SA1022) with DAB as the chromogen.|Figure 2. IHC analysis of CD23 using anti-CD23 antibody (PB9051).CD23 was detected in paraffin-embedded section of Mouse Spleen Tissue. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/ml rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC)(Catalog # SA1022) with DAB as the chromogen.|Figure 3. IHC analysis of CD23 using anti-CD23 antibody (PB9051).CD23 was detected in paraffin-embedded section of Rat Spleen Tissue. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/ml rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC)(Catalog # SA1022) with DAB as the chromogen.|Figure 4. Western blot analysis of CD23 using anti-CD23 antibody (PB9051). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions. Lane 1: Mouse Liver Tissue LysateAfter Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-CD23 antigen affinity purified polyclonal antibody (Catalog # PB9051) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for CD23 at approximately 37KD. The expected band size for CD23 is at 37KD.|Figure 5. Flow Cytometry analysis of mouse BMC cells using anti- CD23 antibody (PB9051).
Overlay histogram showing mouse BMC cells stained with PB9051 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti- CD23 Antibody (PB9051,1μg/1x106 cells) for 30 min at 20°C. DyLight488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.|Figure 6. IF analysis of CD23 using anti-CD23 antibody (PB9051)
CD23 was detected in paraffin-embedded section of mouse lymphaden tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution ) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/mL rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. DyLight488 Conjugated Goat Anti-Rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37°C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.|Figure 7. IF analysis of CD23 using anti-CD23 antibody (PB9051)
CD23 was detected in paraffin-embedded section of rat lymphaden tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution ) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/mL rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. DyLight488 Conjugated Goat Anti-Rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37°C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.|Figure 8. Flow Cytometry analysis of mouse PBMC cells using anti- CD23 antibody (PB9051).Overlay histogram showing mouse PBMC cells stained with PB9051 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti- CD23 Antibody PB9051,1μg/1x106 cells) for 30 min at 20°C. DyLight488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.|Figure 9. Western blot analysis of CD23 using anti- CD23 antibody (PB9051).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: rat spleen tissue lysates,
Lane 2: rat thymus tissue lysates,
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti- CD23 antigen affinity purified polyclonal antibody (Catalog # PB9051) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for CD23 at approximately 49KD. The expected band size for CD23 is at 36KD.|Figure 10. IHC analysis of CD23 using anti- CD23 antibody (PB9051).CD23 was detected in frozen section of mouse spleen tissues. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/ml rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC)(Catalog # SA1022) with DAB as the chromogen.[/list_product_images]
Overlay histogram showing mouse BMC cells stained with PB9051 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti- CD23 Antibody (PB9051,1μg/1x106 cells) for 30 min at 20°C. DyLight488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.|Figure 6. IF analysis of CD23 using anti-CD23 antibody (PB9051)
CD23 was detected in paraffin-embedded section of mouse lymphaden tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution ) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/mL rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. DyLight488 Conjugated Goat Anti-Rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37°C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.|Figure 7. IF analysis of CD23 using anti-CD23 antibody (PB9051)
CD23 was detected in paraffin-embedded section of rat lymphaden tissues. Heat mediated antigen retrieval was performed in citrate buffer (pH6, epitope retrieval solution ) for 20 mins. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/mL rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. DyLight488 Conjugated Goat Anti-Rabbit IgG (BA1127) was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37°C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.|Figure 8. Flow Cytometry analysis of mouse PBMC cells using anti- CD23 antibody (PB9051).Overlay histogram showing mouse PBMC cells stained with PB9051 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti- CD23 Antibody PB9051,1μg/1x106 cells) for 30 min at 20°C. DyLight488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.|Figure 9. Western blot analysis of CD23 using anti- CD23 antibody (PB9051).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: rat spleen tissue lysates,
Lane 2: rat thymus tissue lysates,
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti- CD23 antigen affinity purified polyclonal antibody (Catalog # PB9051) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for CD23 at approximately 49KD. The expected band size for CD23 is at 36KD.|Figure 10. IHC analysis of CD23 using anti- CD23 antibody (PB9051).CD23 was detected in frozen section of mouse spleen tissues. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/ml rabbit anti-CD23 Antibody (PB9051) overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC)(Catalog # SA1022) with DAB as the chromogen.[/list_product_images]
武汉博士德生物工程有限公司
品牌商实名认证
金牌会员
入驻年限：17年
