NEST 程序降温盒

价格： ￥200 - 1000

品牌：NEST

货号：200101

产品详情

NEST程序降温盒

产品简介：

程序降温仪运用于各种细胞类型，包括干细胞，原代细胞，细胞系和酵母等。程序降温盒不需要任何液体及添加剂的辅助，只需放入到超低温冰箱，就能确保降温盒中样品的降温速率达到理想的的细胞保存组合。产品使用便捷，不仅能大大提高使用者的工作效率及保存细胞的存活率，而且对人体，环境，样本更为安全，省心。
The Program Cooling Box can be used for programmed cooling of many cell types including stem cells, primary cells, cell lines and yeast prior to cryopreservation in liquid nitrogen. It is a very good device for all protocols of cell preservation.
规格：六角形、四角形
Features
1. The product is symmetrically designed with a combination of foam and alloy, with no additive or emissions characteristics. These products are environmentally friendly.
2. No need to add any liquid or pre-cooling, simply put your samples directly into the Program Cooling box and keep all your samples in -80℃ freezer. The cooling begins at the rate of -1℃ per minute.
3. Cooling rate consistency is very good. Freeze an individual experiment or a full load, the cooling rate on each sample is the same every time.
4. It promotes a greater survival rate of cells after thawing and helps to keep samples safe and worry-free.
5. Easy-open lid, and you can hold the Program Cooling box directly from the -80℃ freezer without any concern of frostbite to your fingers.
6. Transfer the samples conveniently, you can remove the whole box or an individual sample at any time.
7. No maintenance costs, no need to replace anything, the one-time purchase will be a long-term usage.
8. Reuse time is short, just 5minutes apart.
9. The impact inside the low-temperature refrigerator is very small and does not require a specific free space

产品图片：

使用说明直接将待冷冻样品放入程序冷却箱内的托盘中，盖上盖子。程序冷却箱必须放置在 -80°C 冰箱中至少 3 小时，冷却期间不要打开。冷却过程完成后，可以将样品取出并转移到液氮罐中长期储存。如果您需要快速重复使用程序冷却盒，只需打开盖子并取下托盘，让它们都恢复到室温，然后您就可以再次使用它了。
Instructions for use Directly put the sample to be frozen into the tray inside the Program Cooling box and apply the lid. The Program Cooling box must be placed in -80℃ freezer for at least 3 hours, do not open during the cooling period. After the cooling process is complete, the sample can be removed and transferred to a liquid nitrogen tank for long term storage. If you need to reuse the Program Cooling box quickly, simply open the lid and remove the tray, let them both return to room temperature, then you are ready to use it again.
注意：如果程序冷却的表面（盒子内部或外部）有水，并且将其放置在 -80°C 冰箱中，则其表面的水会将表面冻结在一起。以这种方式打开冻结的盒子可能会损坏程序冷却。始终在干燥的环境中使用程序冷却。在放入冰箱之前，擦去表面的任何水或液体。
Caution: If the Program Cooling has water on its surface (inside or outside the box) and it is placed in -80℃ freezer, the water on its surface will freeze the surfaces together. Opening a box frozen in this way may damage the Program Cooling. Always use the Program Cooling in a dry environment. Wipe any water or liquids from the surface before placing in freezer.