产品详情
文献和实验
相关推荐
库存 ：斜顶圆底顶空样品瓶
保修期 ：斜顶圆底顶空样品瓶
现货状态 ：斜顶圆底顶空样品瓶
供应商 ：上海辅泽商贸有限公司
规格 ：27294
27294斜顶圆底顶空样品瓶, volume 10 mL, beveled finish clear glass vial, O.D. × H 22.6 mm × 46 mm, round bottom, pkg of 100 ea
展开
SU860057
需要 8mm 密封盖的钳口微量样品瓶, volume 0.2 mL, clear glass vial (tapered bottom), O.D. × H 5.5 mm × 31.5 mm, pkg of 100 ea
展开
33279-U
压接钳, Hand crimper, for use with 13mm seals, pkg of 1 ea
展开
27161
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 15 mL, clear glass vial, O.D. × H 21 mm × 70 mm, thread for 18-400
展开
SU860174
用于顶空样品瓶的通用 ND18 螺纹盖, Ultra-clean, solid-top cap, septum thickness 1.3 mm
展开
24756
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/red rubber, diam. 11 mm, pkg of 100 ea
展开
509817
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有固定针头）, 100F-LC, volume 100 μL, needle size 22 ga, needle L × O.D. 2 in. × 0.028 in.
展开
509884
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有可拆卸针头）, 50R-GT-LC, volume 50 μL, needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
27342
预清洗和组装试剂瓶，100个装, volume 15 mL, clear glass vial
展开
27532
预组装广口螺纹口样品瓶，带聚丙烯瓶盖（10-425 螺纹）, volume 2 mL, amber glass vial, red PTFE/silicone septum, pkg of 100 ea
展开
27159
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 15 mL, clear glass vial, O.D. × H 21 mm × 70 mm, tan PTFE/silicone septum
展开
27211
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 15 mL, clear glass vial, tan PTFE/silicone septum
展开
27165
中心开孔酚醛树脂螺纹瓶盖, black phenolic hole cap, for use with 15 mL vial with 18-400 thread, pkg of 100 ea
展开
27380-U
棕褐色 PTFE/硅胶隔垫, tan PTFE/silicone, diam. × thickness 16 mm × 0.060 in., for use with 15 mL vial, pkg of 100 ea
展开
23233
棕色储存瓶, volume 60 mL, O.D. × H 38 mm × 95 mm, thread for 20-400, bottle only, pkg of 12 ea
展开
27556
ABC Vial™（仅样品瓶）, clear glass vial (with marking spot), pkg of 1000 ea
展开
27493
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial, PTFE/silicone septum, pkg of 100 ea
展开
SU860066
Inserts for 1.5 mL large opening vials, volume 0.1 mL, conical clear glass (with bottom spring), pkg of 100 ea
展开
29028-U
Interseal™ 粘合盖（盖和衬管无法分开）, black cap, PTFE/silicone septa (with slit), thread for 9 mm
展开
33300
Mininert®阀，螺纹, for use with 13/425 mm thread, pkg of 12 ea
29041-U
PTFE/硅胶/PTFE 隔垫, red PTFE/silicone/red PTFE, diam. × thickness 9 mm × 1.0 mm, pkg of 100 ea
展开
29064-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, clear glass vial (with graduated marking spot), PTFE/red rubber septum
展开
509957
SGE 微量注射器备用针头, volume 1000-2500 μL, needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.), pkg of 5 ea
展开
29133-U
Snap Seal™ 阶梯式样品瓶，12×32mm，广口，11mm 密封盖, volume 2 mL, amber glass vial, large opening, (6 mm), pkg of 100 ea
展开
27194
Thermoseal® 隔垫, High temperature PTFE/silicone, diam. × thickness 16 mm × 0.100 in., for use with 15mL vial
展开
SU860147
TopSert TPX® autosampler vials, Screw vials, short thread, clear PMP, with integrated 0.2 mL glass insert
展开
29086-U
VersaVial™, volume 2 mL, amber glass vial,
展开
29092-U
VersaVial™ 瓶盖，直径 12mm, white PTFE/silicone plug (with slit)
展开
27352
Viton® 隔垫, black Viton®, diam. × thickness 13 mm × 0.060 in., for use with 7 mL vial, pkg of 100 ea
展开
27037
Micro-Reaction Vessel, black phenolic solid cap, pkg of 12, volume 2 mL, clear glass vial, styrene-butadiene septum, O.D. × H 16 mm × 56 mm
展开
27241
Crimp top vial convenience kit with PTFE/red rubber septa, volume 2 mL, amber glass vial, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, PTFE/red rubber aluminum seal, pkg of 100 ea
展开
27508
Vials, screw top, graduated, solid cap, preassembled, volume 15 mL, clear glass vial, thread for 18-400, O.D. × H 21 mm × 70 mm, PTFE liner
展开
27300
Crimp seals (magnetic) with PTFE/silicone septa, pkg/100, silver steel (magnetic, with 5 mm center hole), PTFE/silicone, seal diam. × total thickness 20 mm × 3 mm
展开
29654-U
Certified Vial Kit, Low Adsorption (LA), 2 mL, pk of 100, volume 2 mL, amber glass vial (with marking spot), natural PTFE/silicone septa (with slit), thread for 9 mm
展开
29664-U
Certified Vial Kit, Low Adsorption (LA) QsertVial™, volume 0.3 mL, QsertVial, amber glass vial, natural PTFE/silicone septa (with slit), thread for 9 mm
展开
27109-U
Vial crimp seals with PTFE/silicone/PTFE septa, seal diam. 11 mm, red PTFE/silicone/red PTFE septum, pkg of 1000 ea
展开
SU860082
1.5mL 卡口样品瓶，12mm×32mm, volume 1.5 mL, amber glass vial (with marking spot), pkg of 100 ea
展开
SU860012
1.5mL 螺纹口透明玻璃样品瓶, volume 1.5 mL, clear glass vial, thread for 10-425, O.D. × H × I.D. 11.6 mm × 32 mm × 6 mm
展开
854998
11.6×32mm 广口 (6 mm) 钳口样品瓶，容量 1.5mL, volume 1.5 mL, amber glass vial (with marking spot), O.D. × H × I.D. 11.6 mm × 32 mm × 6 mm, pkg of 100 ea
展开
29128-U
12×32mm 广口钳口样品瓶便利套装, amber glass vial, PTFE/silicone septum
27076
15×45mm 样品瓶的内衬管, volume 0.25 mL, glass, , O.D. × H 6 mm × 39 mm, pkg of 1000 ea
展开
29119-U
2mL 带盖广口螺纹口样品瓶，未组装便利套装, volume 2 mL, amber glass vial, thread for 10-425, black polypropylene cap, PTFE/silicone septa, pkg of × 100 ea
展开
24717
2mL 广口样品瓶的内衬管，6.0mm 内径, volume 0.25 mL, conical clear glass, O.D. × H × I.D. 6 mm × 31 mm × 4.6 mm, pkg of 100 ea
展开
27566-U
带 0.3mL 小体积内衬管的 ABC Vial™, clear glass vial, PTFE/silicone/PTFE septum, clear polypropylene cap
展开
27164
带铝衬垫的顶部实心螺纹瓶盖, black phenolic solid cap, aluminum liner, thread for 18-400, for use with 15 mL vial
展开
29332-U
带瓶盖和隔垫的中心集液 (CD) 螺纹样品瓶, volume 4 mL, clear glass vial, O.D. × H 15 mm × 51 mm, PTFE/silicone, pkg of 100 ea
展开
SU860118
带瓶塞的压盖瓶，8mm×35mm, clear glass, volume 1.0 mL, vial diam. × H 7.8 mm × 35 mm
展开
24881
带切口的 PTFE/硅胶, red PTFE/white silicone (with slit), diam. × thickness 8 mm × 1.5 mm, pkg of 1000 ea
展开
854985
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 8-425, PTFE/silicone (red PTFE/creme silicone), septum thickness 1.5 mm, for use with 2 mL vial (standard opening), pkg of 1000 ea
展开
854987
带有 TFE/橡胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 13-425, PTFE/red rubber septum, for use with 4 mL vials with 13-425 thread, pkg of 100 ea
展开
27307
顶空样品瓶套件, volume 20 mL, PTFE/butyl rubber septum, vial O.D. × H 23 mm × 75 mm
展开
854971
短螺纹瓶盖，9mm 螺纹，带衬垫, clear cap, PTFE/silicone septum, septum diam. × thickness 9 mm × 1.0 mm, pkg of 1000 ea
展开
24886-U
隔垫型隔膜, aluminum/silicone, diam. × thickness 18 mm × 0.060 in., for use with 22 mL vial
展开
27277
红色 PTFE/硅胶隔垫, red PTFE/white silicone, diam. × thickness 10 mm × 0.060 in., for use with 2 mL, 10/425 thread, large opening, pkg of 100 ea
展开
23201
节省空间型存放架, for use with 21-23 mm diameter vial (36 vials per rack), well opening 23.1 mm, pkg of 5 ea
展开
27238
经硅烷化处理螺纹口样品瓶, volume 2 mL, amber glass vial, O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm
展开
29314-U
经过认证的 CD 样品瓶（中心集液）套装，带有 9mm 螺纹和瓶盖/隔垫，未组装, volume 1.5 mL, amber glass vial, PTFE/silicone (with slit), pkg of 100 ea
展开
29401-U
经过认证的 QSertVial 螺纹口样品瓶套装（熔接有内衬管的样品瓶），12×32mm，300μL, amber glass vial, PTFE/silicone septum (bonded with slit), thread for 9 mm
展开
29319-U
经过认证的带隔垫聚丙烯盖, 9 mm cap, PTFE/silicone septum, dark blue polypropylene cap
展开
29377-U
经过认证的螺纹口样品瓶，9mm 螺纹，12×32mm, volume 0.3 mL, natural polypropylene vial, pkg of 100 ea
29385-U
经过认证的螺纹口样品瓶套装，12×32mm，9mm 螺纹，未组装, volume 2 mL, amber glass vial, PTFE/silicone septum (bonded to cap)
展开
29423-U
经过认证的样品瓶套装，带有 Pico Pure Plus 瓶盖, volume 2 mL, clear glass vial (with graduated marking spot), polyethylene cap, thread for 9 mm
展开
29122-U
具有熔融玻璃内衬管的螺纹样品瓶, volume 0.3 mL, clear glass vial, thread for 10-425, pkg of 100 ea
展开
24765
开孔聚丙烯螺纹瓶盖, yellow polypropylene hole cap, thread for 8-425, no septum, pkg of 1000 ea
展开
27512
蓝色 PTFE/白色硅胶隔垫, blue PTFE/white silicone, diam. × thickness 13 mm × 0.060 in., for use with 7 mL vial
展开
27230-U
铝压接盖（不带隔垫），银色铝, open center, diam. × opening 20 mm × 9.5 mm, pkg of 100 ea
展开
27171
螺纹盖样品瓶，带铝衬垫实心瓶盖，预组装，100个装, volume 22 mL, clear glass vial, O.D. × H 23 mm × 85 mm, thread for 20-400
展开
29018-U
螺纹口聚丙烯样品瓶, volume 0.5 mL, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, thread for 9 mm, pkg of × 100 ea
展开
854190
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 4 mL, clear glass vial, thread for 13-425, pkg of 100 ea
展开
27267-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 2 mL, amber glass vial, thread for 10-425, pkg of 100 ea
展开
27174-U
螺旋盖，带聚四氟乙烯衬里的实心顶部，100个装, green melamine resin solid cap, F217/PTFE liner, for use with 22 mL vial with 20 mm thread
展开
29178-U
双金属（磁性）20mm 钳口密封盖样品瓶，带有聚四氟乙烯/硅胶隔垫, green seal, PTFE/silicone septa, diam. × thickness 20 mm × 3 mm
展开
27027-U
透明玻璃螺纹口样品瓶，带刻度（仅样品瓶）, volume 22 mL, thread for 20-400, pkg of 100 ea
展开
33297
微型反应容器，3mL，黑色酚醛孔盖，12件装, volume 3 mL, clear glass vial, PTFE/red rubber septum, O.D. × H 20 mm × 47 mm, thread for 20-400
展开
29145-U
未组装的 Snap Seal™ 样品瓶，套装, volume 2 mL, amber glass vial, PTFE/silicone septum
展开
SU860056
需要 8mm 密封盖的钳口微量样品瓶, volume 0.3 mL, clear glass vial (round bottom), O.D. × H 5.5 mm × 31.5 mm, pkg of 100 ea
展开
33280-U
压接钳, Hand crimper, for use with 20mm seals, pkg of 1 ea
展开
27172-U
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 22 mL, clear glass vial, O.D. × H 23 mm × 85 mm, thread for 20-400
展开
33321-U
用于 Waters 96 孔转盘的 8×40mm 样品瓶, volume 1 mL, clear glass vial, vial O.D. × H 8 mm × 40 mm, pkg of 200 ea
展开
SU860095
用于固相微萃取的 11mm 钳口密封盖样品瓶, gold seal, magnetic (with 5 mm center hole), red PTFE/silicone/red PTFE septum, septum diam. × thickness 11 mm × 1.0 mm, for use with CTC PAL and TriPlus autosamplers, pkg of 100 ea
24757
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/red rubber, diam. 11 mm, pkg of 1000 ea
展开
509825
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有固定针头）, 250F-LC, volume 0.25 mL (250 μL), needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
509892
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有可拆卸针头）, 100R-GT-LC, volume 100 μL, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
27536
预组装广口螺纹口样品瓶，带聚丙烯瓶盖（10-425 螺纹）, volume 2 mL, amber glass vial, PTFE/silicone (with slit), pkg of 100 ea
展开
27170
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 22 mL, clear glass vial, O.D. × H 23 mm × 85 mm, tan PTFE/silicone septum
展开
27212
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 22 mL, clear glass vial, O.D. × H 23 mm × 85 mm, tan PTFE/silicone septum
展开
27176
中心开孔酚醛树脂螺纹瓶盖, black phenolic hole cap, for use with 22 mL vial with 20-400 thread, pkg of 100 ea
展开
27166
棕褐色 PTFE/硅胶隔垫, white tan PTFE/silicone, diam. × thickness 16 mm × 0.090 in., for use with 15 mL vial, pkg of 100 ea
展开
23230-U
棕色储存瓶, volume 120 mL, O.D. × H 49 mm × 114 mm, thread for 22-400, PTFE/silicone septum, black phenolic hole cap, pkg of 12 ea
展开
27331
ABC Vial™（仅样品瓶）, amber glass vial, pkg of 100 ea
展开
27496
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial (with marking spot), PTFE/silicone septum, pkg of 100 ea
展开
854110
Inserts for 1.5 mL large opening vials, volume 0.1 mL, conical clear glass (with bottom spring), pkg of 1000 ea
展开
29099-U
Interseal™ 粘合盖（盖和衬管无法分开）, white cap, PTFE/silicone, thread for 8-425
展开
33301
Mininert®阀，螺纹, for use with 15/425 mm thread, pkg of 12 ea
展开
27156
PTFE/红色橡胶隔垫, PTFE/red rubber, diam. × thickness 13 mm × 0.050 in., for use with 7 mL vials
展开
29065-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, clear glass vial (with graduated marking spot), PTFE/silicone septum
展开
SU860151
Septa for Magnetic Screw Caps, diam. × thickness 17 mm × 1.6 mm
展开
27195
Thermoseal® 隔垫, High temperature PTFE/silicone, diam. × thickness 18 mm × 0.060 in., for use with 22mL vial
展开
29087-U
VersaVial™, volume 1.5 mL, natural polypropylene vial
展开
27354
Viton® 隔垫, black Viton®, diam. × thickness 18 mm × 0.060 in., for use with 22 mL vial, pkg of 100 ea
27038-U
Micro-Reaction Vessel, black phenolic solid cap, pkg of 12, volume 3 mL, clear glass vial, styrene-butadiene septum, O.D. × H 20 mm × 47 mm
展开
27509
Vials, screw top, graduated, solid cap, preassembled, volume 22 mL, clear glass vial, thread for 20-400, O.D. × H 23 mm × 85 mm, PTFE liner
展开
854179-U
Crimp seals (magnetic) with PTFE/silicone septa, pkg/100, gold seal (magnetic, with 5 mm center hole), (silcone blue transparent/PTFE transparent), diam. × thickness 20 mm × 3.0 mm, open center
展开
27240-U
Crimp top vial convenience kit with PTFE/red rubber septa, volume 2 mL, clear glass vial, vial O.D. × H × I.D. 12 mm × 32 mm × 6 mm, PTFE/red rubber aluminum seal, pkg of 1000 ea
展开
33265-U
Vial crimp seals with PTFE/silicone/PTFE septa, seal diam. × thickness 8 mm × 1 mm, silver aluminum seal, red PTFE/silicone/red PTFE septum, pkg of 200 ea
展开
854974
1.5mL 卡口样品瓶，12mm×32mm, volume 1.5 mL, clear glass vial, pkg of 1000 ea
展开
854500
11.6×32mm 广口 (6 mm) 钳口样品瓶，容量 1.5mL, volume 1.5 mL, clear glass vial (with marking spot), O.D. × H × I.D. 11.6 mm × 32 mm × 6 mm, pkg of 1000 ea
展开
29129-U
12×32mm 广口钳口样品瓶便利套装, amber glass vial, PTFE/silicone/PTFE septum
展开
24705
2mL 标准开口样品瓶的内衬管，4.6mm 内径, volume 0.15 mL, conical clear glass (with polyflange), O.D. × H 5 mm × 29 mm, pkg of 100 ea
展开
29121-U
2mL 带盖广口螺纹口样品瓶，未组装便利套装, volume 2 mL, amber glass vial, thread for 10-425, black polypropylene cap, PTFE/silicone/PTFE septa
展开
24718
2mL 广口样品瓶的内衬管，6.0mm 内径, volume 0.25 mL, conical clear glass, O.D. × H × I.D. 6 mm × 31 mm × 4.6 mm, pkg of 1000 ea
展开
24751
2mL 卡口样品瓶，12mm×32mm，广口 (6.0mm), volume 2 mL, clear glass vial, pkg of 2000 ea
展开
27361
白色 PTFE/硅胶隔垫, septum diam. × thickness × PTFE thickness 20 mm × 0.125 in. × 0.005 in., pkg of 100 ea
展开
27567-U
带 0.3mL 小体积内衬管的 ABC Vial™, clear glass vial, PTFE liner (no septum), clear polypropylene cap
展开
SU860138
带 PTFE/丁基橡胶隔垫的钳口密封盖 (Pharma-Fix), PTFE/butyl rubber (Pharma-Fix), pkg of 1000 ea
展开
27362
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, seal diam. 20 mm, open center, white PTFE/silicone septum, pkg of 100 ea
展开
27559
带衬垫的螺纹盖（9mm 螺纹）, clear cap, PTFE/red rubber septum, pkg of 1000 ea
展开
27175-U
带铝衬垫的顶部实心螺纹瓶盖, black phenolic solid cap, aluminum liner, for use with 22 mL vial (with 20 mm thread), thread for 20-400
展开
27098-U
带切口的 PTFE/硅胶, red PTFE/white silicone (with slit), diam. × thickness 8 mm × 1.5 mm, for use with screw top vial, 4.6 mm I.D., 8/425 thread, pkg of 100 ea
展开
SU860106
带有 Viton® 隔垫的钳口密封盖, silver seal, magnetic (with 8 mm center hole), diam. × thickness 20 mm × 1.0 mm, black Viton® septum, pkg of 100 ea
27245
带有 Viton® 隔垫的钳口密封盖, silver aluminum seal, diam. 20 mm, open center, 8 mm center hole, black Viton® septum, thickness 0.76 mm, pkg of × 100 ea
展开
27198
顶空样品瓶(透明玻璃材质,斜顶平底), volume 10 mL, O.D. × H × I.D. 23 mm × 46 mm × 12.5 mm, pkg of 100 ea
展开
854973
短螺纹瓶盖，9mm 螺纹，带衬垫, blue cap, PTFE/red rubber septum, thickness 1.0 mm, pkg of 1000 ea
展开
27189
隔垫型隔膜, barrier (aluminum faced silicone), diam. × thickness 20 mm × 0.100 in., pkg of 100 ea
展开
29039-U
红色 PTFE/硅胶隔垫, red PTFE/silicone, diam. × thickness 9 mm × 1.0 mm, pkg of 100 ea
展开
23206
节省空间型存放架, for use with 29 mm diameter vial (50 vials per rack), well opening 30.0 mm, pkg of 5 ea
展开
27219
经硅烷化处理螺纹口样品瓶, volume 2 mL, amber glass vial, O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, standard opening
展开
29320-U
经过认证的带隔垫聚丙烯盖, 9 mm cap, PTFE/silicone septum (with slit), dark blue polypropylene cap
展开
29386-U
经过认证的螺纹口样品瓶套装，12×32mm，9mm 螺纹，未组装, volume 2 mL, amber glass vial (with graduated marking spot), PTFE/silicone septum (bonded to cap)
展开
29424-U
经过认证的样品瓶套装，带有 Pico Pure Plus 瓶盖, volume 2 mL, amber glass vial, polyethylene cap, thread for 9 mm
展开
29123-U
具有熔融玻璃内衬管的螺纹样品瓶, volume 0.3 mL, amber glass vial, thread for 10-425, pkg of 100 ea
展开
27513
蓝色 PTFE/白色硅胶隔垫, blue PTFE/white silicone, diam. × thickness 16 mm × 0.060 in., for use with 15 mL vial
展开
27468-U
螺纹盖样品瓶，带铝衬垫实心瓶盖，预组装，100个装, volume 2 mL, amber glass vial (standard opening - 4.6 mm), O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, thread for 8-425
展开
27411
螺纹口聚丙烯样品瓶, volume 0.75 mL, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, thread for 10-425, pkg of 100 ea
展开
27113
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 4 mL, clear glass vial (with marking spot), thread for 13-425, pkg of 1000 ea
展开
27084-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 2 mL, amber glass vial (with marking spot), thread for 8-425, pkg of 100 ea
展开
27186
螺旋盖，带聚四氟乙烯衬里的实心顶部，100个装, green melamine resin solid cap, F217/PTFE liner, for use with 20 or 40 mL vial with 24-400 thread
展开
SU860104
钳口样品瓶，用于薄型密封, volume 20 mL, clear glass vial (flat top), closure type, crimp top vial, O.D. × H 22.5 mm × 75.5 mm, pkg of 100 ea
展开
SU860051
钳口样品瓶，用于薄型密封, volume 20 mL, clear glass (Thin seal vial for SPME), O.D. × H 22.5 mm × 75.5 mm, pkg of 100 ea
展开
27028-U
透明玻璃螺纹口样品瓶，带刻度（仅样品瓶）, volume 40 mL, thread for 24-400, pkg of 100 ea
33299
微型反应容器，3mL，黑色酚醛孔盖，12件装, volume 5 mL, clear glass vial, PTFE/red rubber septum, O.D. × H 20 mm × 62 mm, thread for 20-400
展开
29146-U
未组装的 Snap Seal™ 样品瓶，套装, volume 2 mL, amber glass vial, PTFE/silicone/PTFE septum
展开
508438
斜顶圆底顶空样品瓶, volume 10 mL, clear glass vial, O.D. × H × I.D. 22 mm × 45 mm × 12.5 mm, pkg of 100 ea
展开
27181
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 40 mL, clear glass vial, O.D. × H 29 mm × 82 mm, PTFE liner
展开
509833
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有固定针头）, 500F-LC, volume 500 μL, needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
509906
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有可拆卸针头）, 250R-GT-LC, volume 0.25 mL (250 μL), needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
27535
预组装广口螺纹口样品瓶，带聚丙烯瓶盖（10-425 螺纹）, volume 2 mL, amber glass vial, PTFE/silicone/PTFE septum, pkg of 100 ea
展开
27180
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 40 mL, clear glass vial, O.D. × H 29 mm × 82 mm, tan PTFE/silicone septum
展开
27213
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 40 mL, clear glass vial, O.D. × H 29 mm × 82 mm, tan PTFE/silicone septum
展开
23236
中心开孔酚醛树脂螺纹瓶盖, black phenolic cap, 10 mL SPME vial with 22-400 thread, pkg of 144 ea
展开
27253
自动进样器卡口聚丙烯微量样品瓶, volume 0.75 mL, natural polypropylene vial, Snap top, pkg of 100 ea
展开
27177
棕褐色 PTFE/硅胶隔垫, white tan PTFE/silicone, diam. × total thickness × PTFE thickness 18 mm × 0.060 in. × 5 mil, for use with 22 mL vial, pkg of 100 ea
展开
23234
棕色储存瓶, volume 120 mL, O.D. × H 49 mm × 114 mm, thread for 22-400, bottle only, pkg of 12 ea
展开
27555-U
ABC Vial™（仅样品瓶）, amber glass vial, pkg of 1000 ea
展开
SU860067
Inserts for 1.5 mL large opening vials, volume 0.1 mL, conical clear glass, O.D. × H × I.D. 6 mm × 31 mm × 4.6 mm, pkg of × 100 ea
展开
33302
Mininert®阀，螺纹, for use with 18/400 mm thread, pkg of 12 ea
展开
23187-U
MRQ30 透明 CD Vial™，蓝色瓶盖，预切口的 TEF/硅胶隔垫, volume 1.2 mL, clear glass vial, thread for 9 mm, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, pkg of 100 ea
展开
27122-U
PTFE/硅胶/PTFE 隔垫, red PTFE/silicone/red PTFE, septum diam. × thickness 11 mm × 0.040 in., for use with 4mL vial, pkg of 100 ea
展开
27276
PTFE/硅胶/PTFE 隔垫, red PTFE/silicone/red PTFE, for use with hole cap, 10 × 425mm, diam. × thickness 10 mm × 0.040 in., pkg of × 1000 ea
展开
27167
PTFE/红色橡胶隔垫, PTFE/red rubber, diam. × thickness 16 mm × 0.060 in., for use with 15 mL vial
SU860165
Push-On cap, 8 mm, diam. 11 mm, blue polyethylene
展开
29066-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, clear glass vial (with graduated marking spot), PTFE/silicone/PTFE septum
展开
SU860173
Septa for Magnetic Screw Caps, diam. × thickness 17 mm × 1.6 mm
展开
27540-U
Thermoseal® 隔垫, High temperature PTFE/silicone, diam. × thickness 20 mm × 0.060 in.
展开
SU860043
TopSert TPX® autosampler vials, Short thread vial with integrated 0.2 mL glass insert, 15 mm tip
展开
27039
Micro-Reaction Vessel, black phenolic solid cap, pkg of 12, volume 5 mL, clear glass vial, styrene-butadiene septum, O.D. × H 20 mm × 62 mm
展开
27242-U
Crimp top vial convenience kit with PTFE/red rubber septa, volume 2 mL, amber glass vial, vial O.D. × H × I.D. 12 mm × 32 mm × 6 mm, PTFE/red rubber aluminum seal, pkg of 1000 ea
展开
33266-U
Vial crimp seals with PTFE/silicone/PTFE septa, seal diam. × thickness 8 mm × 1 mm, silver aluminum seal, red PTFE/silicone/red PTFE septum, pkg of 1000 ea
展开
SU860064
11.6×32mm 广口 (6 mm) 钳口样品瓶，容量 1.5mL, volume 1.5 mL, clear glass vial (with marking spot), O.D. × H × I.D. 11.6 mm × 32 mm × 6 mm, pkg of 100 ea
展开
24752
2mL 卡口样品瓶，12mm×32mm，广口 (6.0mm), volume 2 mL, amber glass vial, pkg of 100 ea
展开
27374
白色 PTFE/硅胶隔垫, diam. × thickness × PTFE thickness 20 mm × 125 mil × 0.005 in., for use with 20mm crimp seal, 22 mm cap, pkg of 1000 ea
展开
SU860010
带 PTFE/硅胶隔垫的钳口密封盖, diam. × total thickness × PTFE thickness 20 mm × 3 mm × 5 mil, silver aluminum seal (10mm opening), open center, (silicone blue transparent/PTFE transparent), pkg of 1000 ea
展开
854188
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, gold aluminum seal, size × thickness 11 mm × 1.0 mm, septum (TFE/butyl/red rubber), pkg of 100 ea
展开
33233-U
带 PTFE/橡胶隔垫的钳口密封盖, silver aluminum seal, seal diam. × thickness 11 mm × 1.0 mm, opening size 4.8 mm
展开
29497-U
带预切口隔垫的瓶盖, size 18 mm, Magnetic screw thread cap, UltraClean, red PTFE/silicone, thickness 1.5 mm
展开
SU860009
短螺纹自动进样器样品瓶（9mm 螺纹），11.6mm×32mm, volume 1.5 mL, clear glass vial, PTFE/silicone septum, unassembled, pkg of 1000 ea
展开
27190-U
隔垫型隔膜, aluminum/silicone, diam. × thickness 22 mm × 0.100 in., for use with 20, 40, or 60 mL vial
展开
27278
红色 PTFE/硅胶隔垫, red PTFE/white silicone, diam. × thickness 10 mm × 0.060 in., for use with 2 mL, 10/425 thread, large opening vial, pkg of 1000 ea
展开
29321-U
经过认证的带隔垫聚丙烯盖, 9 mm cap, PTFE/silicone/PTFE septum, dark blue polypropylene cap
展开
29387-U
经过认证的螺纹口样品瓶套装，12×32mm，9mm 螺纹，未组装, volume 2 mL, amber glass vial (with graduated marking spot), PTFE/silicone septum (with slit), (septa bonded to cap)
29425-U
经过认证的样品瓶套装，带有 Pico Pure Plus 瓶盖, volume 2 mL, amber glass vial (with graduated marking spot), polyethylene cap, thread for 9 mm
展开
27514
蓝色 PTFE/白色硅胶隔垫, blue PTFE/white silicone, diam. × thickness 18 mm × 0.060 in., for use with 22 mL vial
展开
27200
铝压接盖（不带隔垫），银色铝, , diam. × opening 20 mm × 8 mm, pkg of × 100 ea
展开
27470-U
螺纹盖样品瓶，带铝衬垫实心瓶盖，预组装，100个装, volume 7 mL, amber glass vial, O.D. × H 17 mm × 60 mm, thread for 15-425
展开
27085-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 2 mL, amber glass vial (with marking spot), thread for 8-425, pkg of 1000 ea
展开
508675
透明钳口样品瓶，带 0.3mL 内衬管，12×32，一包 100 个, volume 0.3 mL, closure type, crimp top vial, clear glass vial (with insert), O.D. × H × I.D. 12 mm × 32 mm × 6 mm, pkg of 100 ea
展开
27479
微型反应容器，3mL，黑色酚醛孔盖，12件装, volume 10 mL, clear glass vial, O.D. × H 26 mm × 72 mm, PTFE/silicone septum, graduations: no
展开
33143
小瓶，钳口，血清瓶，288个装, volume 10 mL, amber glass bottle, O.D. × H 25 mm × 50 mm, pkg of 36 ea
展开
27000
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 2 mL, amber glass vial (standard opening - 4.6 mm), O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, thread for 8-425
展开
33326
用于 Waters 96 孔转盘的 8×40mm 样品瓶, volume 1 mL, clear glass vial, vial O.D. × H 8 mm × 40 mm, pkg of 1000 ea
展开
27427
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/silicone (with starburst), thread for 11 mm (snap ring), pkg of 100 ea
展开
509914
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有可拆卸针头）, 500R-GT-LC, volume 500 μL, needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
27344
预清洗和组装试剂瓶，100个装, volume 2 mL, amber glass vial
展开
27089-U
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 40 mL, clear glass vial, O.D. × H 27.5 mm × 95 mm, tan PTFE/silicone septum
展开
27046-U
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 2 mL, amber glass vial (standard opening - 4.6 mm), PTFE/silicone septum
展开
27187
中心开孔酚醛树脂螺纹瓶盖, black phenolic hole cap, for use with 20 or 40 mL vial with 24-400 thread, pkg of 100 ea
展开
27254
自动进样器卡口聚丙烯微量样品瓶, volume 0.75 mL, natural polypropylene vial, pkg of 1000 ea
展开
23193-U
棕褐色 PTFE/硅胶隔垫, white tan PTFE/silicone, diam. × thickness 22 mm × 0.125 in., for use with 20, 40 or 60 mL vial, pkg of 100 ea
展开
23231
棕色储存瓶, volume 240 mL, O.D. × H 61 mm × 143 mm, thread for 24-400, PTFE/silicone septum, black phenolic hole cap, pkg of 12 ea
展开
27332
ABC Vial™（仅样品瓶）, amber glass vial (with marking spot), pkg of 100 ea
29102-U
Interseal™ 粘合盖（盖和衬管无法分开）, black cap, PTFE/silicone, thread for 8-425
展开
33305
Mininert® 阀, for use with 20 mm crimp seal, pkg of 12 ea
展开
33303
Mininert®阀，螺纹, for use with 20/400 mm thread, pkg of 12 ea
展开
27146
PTFE 瓶盖衬垫, white PTFE, diam. × thickness 13 mm × 0.010 in., for use with 4 mL vial, pkg of 100 ea
展开
27275
PTFE/硅胶/PTFE 隔垫, diam. × thickness 10 mm × 0.040 in., for use with 2 mL vials - large opening, pkg of × 100 ea
展开
27178
PTFE/红色橡胶隔垫, PTFE/red rubber, diam. × thickness 18 mm × 0.050 in., for use with 22 mL vial, pkg of 100 ea
展开
29061-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, amber glass vial, PTFE/red rubber septum
展开
SU860172
Septa for Magnetic Screw Caps, blue PTFE/white silicone, diam. × thickness 17.5 mm × 1.5 mm
展开
27196
Thermoseal® 隔垫, High temperature PTFE/silicone, diam. × thickness 22 mm × 0.100 in., for use with 20, 40, or 60 mL vial
展开
SU860188
TopSert TPX® autosampler vials, Screw vials, short thread, amber PMP, with integrated 0.2 mL glass insert
展开
SU860087
Vial crimp seals with PTFE/silicone/PTFE septa, seal diam. × thickness 8 mm × 1.0 mm, silver aluminum seal, red PTFE/silicone/red PTFE septum, pkg of 100 ea
展开
854964
11.6×32mm 广口 (6 mm) 钳口样品瓶，容量 1.5mL, volume 1.5 mL, clear glass vial, O.D. × H × I.D. 11.6 mm × 32 mm × 6 mm, pkg of 1000 ea
展开
29000-U
12×32mm R.A.M.™（9mm 螺纹）广口螺纹口样品瓶, volume 2 mL, clear glass vial, pkg of × 100 ea
展开
27407
2mL 广口样品瓶的内衬管，6.0mm 内径, volume 0.25 mL, glass (with glass flange), for use with Step Vials, pkg of 100 ea
展开
854142
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, green aluminum seal, size × thickness 11 mm × 1.0 mm, septum (TFE/butyl/red rubber), pkg of 1000 ea
展开
27273
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 10-425, PTFE/silicone, septum thickness 1.5 mm, for use with 2 mL vial (large opening), pkg of 100 ea
展开
29498-U
带预切口隔垫的瓶盖, size size 9 mm, blue polypropylene, red PTFE/silicone, size × thickness × 1.0 mm
展开
27199
顶空样品瓶(透明玻璃材质,斜顶平底), volume 20 mL, O.D. × H × I.D. 23 mm × 75 mm × 12.5 mm, pkg of 100 ea
展开
27097-U
红色 PTFE/硅胶隔垫, red PTFE/white silicone, diam. × thickness 8 mm × 1.5 mm, pkg of 100 ea
展开
27114
经硅烷化处理螺纹口样品瓶, volume 4 mL, clear glass vial, O.D. × H × I.D. 15 mm × 45 mm × 8 mm
29388-U
经过认证的螺纹口样品瓶套装，12×32mm，9mm 螺纹，未组装, volume 0.3 mL, natural polypropylene vial, PTFE/silicone septum (bonded to cap)
展开
27515
蓝色 PTFE/白色硅胶隔垫, blue PTFE/white silicone, diam. × thickness 22 mm × 0.060 in., for use with 20, 40, 60 mL vial
展开
27472
螺纹盖样品瓶，带铝衬垫实心瓶盖，预组装，100个装, volume 22 mL, amber glass vial, O.D. × H 23 mm × 85 mm, thread for 20-400
展开
27151
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 7 mL, clear glass vial, thread for 15-425, pkg of 100 ea
展开
28659-U
螺旋盖，带聚四氟乙烯衬里的实心顶部，100个装, thread for 10-425
展开
SU860145
瓶塞, diam. 20 mm
展开
33144
小瓶，钳口，血清瓶，288个装, volume 10 mL, amber glass bottle, O.D. × H 25 mm × 50 mm, pkg of 288 ea
展开
27296
斜顶圆底顶空样品瓶, volume 20 mL, beveled finish clear glass vial, O.D. × H 22.6 mm × 75 mm, pkg of 100 ea
展开
27001-U
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 4 mL, amber glass vial, O.D. × H 15 mm × 45 mm, thread for 13-425
展开
27537
用于 Waters 96 孔转盘的 8×40mm 样品瓶, volume 0.7 mL, natural polypropylene vial, vial O.D. × H 8 mm × 40 mm, closure type, starburst conical snap plug (included), pkg of 100 ea
展开
SU860093
用于卡口样品瓶的瓶盖, clear polyethylene cap, red PTFE/silicone, thread for 11 mm (snap ring), pkg of 100 ea
展开
509922
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有可拆卸针头）, 1MR-LC-GT, volume 1000 μL, needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
27345
预清洗和组装试剂瓶，100个装, volume 4 mL, amber glass vial
展开
27005
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 2 mL, amber glass vial (standard opening - 4.6 mm), O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, red PTFE/silicone septum
展开
27047
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 4 mL, amber glass vial, O.D. × H 15 mm × 45 mm, tan PTFE/silicone septum
展开
29365-U
中心集液 (CD) 螺纹样品瓶，厚壁，带瓶盖和 PTFE/硅胶隔垫, volume 3 mL, clear glass vial, with graduations, O.D. × H 20 mm × 46 mm, plate of 12 ea
展开
23237
中心开孔酚醛树脂螺纹瓶盖, black phenolic cap (no septum), thread for 24-400, pkg of 144 ea
展开
SU860184
自动进样器卡口聚丙烯微量样品瓶, clear polypropylene, volume 0.7 mL
展开
27188-U
棕褐色 PTFE/硅胶隔垫, white tan PTFE/silicone, diam. × thickness 22 mm × 0.100 in., for use with 20, 40 or 60 mL vial, pkg of 100 ea
展开
23235
棕色储存瓶, volume 240 mL, O.D. × H 61 mm × 143 mm, thread for 24-400, bottle only, pkg of 12 ea
27557
ABC Vial™（仅样品瓶）, amber glass vial (with marking spot), pkg of 1000 ea
展开
29103-U
Interseal™ 粘合盖（盖和衬管无法分开）, black cap, PTFE/silicone (with slit), thread for 8-425
展开
33304
Mininert®阀，螺纹, for use with 24/400 mm thread, pkg of 12 ea
展开
27157
PTFE 瓶盖衬垫, white PTFE, diam. × thickness 15 mm × 0.010 in., for use with 7 mL vial, pkg of 100 ea
展开
27096-U
PTFE/硅胶/PTFE 隔垫, red PTFE/silicone/red PTFE, diam. × thickness 8 mm × 1.0 mm, pkg of 100 ea
展开
27233
PTFE/红色橡胶隔垫, PTFE/red rubber, diam. × thickness 20 mm × 0.125 in., for use with 20 mm crimp seal, 22 mm screw cap
展开
29062-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, amber glass vial, PTFE/silicone septum
展开
SU860150
Septa for Magnetic Screw Caps, diam. × thickness 17.5 mm × 1.5 mm
展开
SU860166
TopSert TPX® autosampler vials, amber TPX® polymethylpentene (with integrated 0.2 mL glass insert)
展开
SU860055
11.6×32mm 广口 (6 mm) 钳口样品瓶，容量 1.5mL, volume 1.5 mL, clear glass vial, O.D. × H 11.6 mm × 32 mm, pkg of 100 ea
展开
27065
2mL 12×32mm 棕色玻璃钳口样品瓶, volume 2 mL, amber glass vial, pkg of 1000 ea
展开
24707
2mL 标准开口样品瓶的内衬管，4.6mm 内径, volume 0.15 mL, conical clear glass (with bottom spring), O.D. × H 5 mm × 30 mm, pkg of 100 ea
展开
24719
2mL 广口样品瓶的内衬管，6.0mm 内径, volume 0.15 mL, conical clear glass (with top spring), O.D. × H × I.D. 6 mm × 29 mm × 4.6 mm, pkg of 100 ea
展开
854144
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, red aluminum seal, size × thickness 11 mm × 1.0 mm, septum (TFE/butyl/red rubber), pkg of 1000 ea
展开
27560-U
带衬垫的螺纹盖（9mm 螺纹）, clear cap, PTFE/silicone/PTFE septum, pkg of 1000 ea
展开
29343-U
带瓶盖和隔垫的中心集液 (CD) 螺纹样品瓶, volume 40 mL, clear glass vial, O.D. × H 27.75 mm × 103 mm, PTFE/silicone, pkg of 50 ea
展开
27018
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 13-425, PTFE/silicone, septum thickness 1.5 mm, for use with 4 mL vial, pkg of 100 ea
展开
28298-U
带有 Viton® 隔垫的钳口密封盖, aluminum seal, open center, seal diam. 20 mm, 8 mm center hole, black Viton® septum, diam. × thickness 20 mm × 0.76 mm, pkg of 288 ea
展开
SU860125
短螺纹瓶盖，9mm 螺纹，带衬垫, Ultra-clean, green polypropylene (with 6 mm center hole)
展开
29389-U
经过认证的螺纹口样品瓶套装，12×32mm，9mm 螺纹，未组装, volume 0.3 mL, natural polypropylene vial, PTFE/silicone septum (with slit), (septa bonded to cap)
27016
铝压接盖（不带隔垫），银色铝, tear-away, diam. 20 mm, pkg of 100 ea
展开
27439
螺纹盖, black polypropylene (Top Hat), PTFE/silicone, for use with 4 mL vial with 13-425 thread, pkg of 100 ea
展开
27162
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 15 mL, clear glass vial, thread for 18-400, pkg of 100 ea
展开
27406
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 2 mL, amber glass vial, thread for 10-425, pkg of 100 ea
展开
27333
钳口盖样品瓶, volume 0.9 mL, clear glass vial, conical bottom, O.D. × H × I.D. 10 mm × 32 mm × 6 mm, pkg of 125 ea
展开
33106
小瓶，钳口，血清瓶，288个装, volume 30 mL, clear glass bottle, O.D. × H 36.6 mm × 62.8 mm, pkg of 36 ea
展开
27312
需要 8mm 密封盖的钳口微量样品瓶, volume 0.6 mL, amber glass vial, O.D. × H 7 mm × 30 mm , conical, pkg of 200 ea
展开
27002-U
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 7 mL, amber glass vial, O.D. × H 17 mm × 60 mm, thread for 15-425
展开
27290
用于 Waters 96 孔转盘的 8×40mm 样品瓶, volume 1 mL, amber glass vial, vial O.D. × H 8 mm × 40 mm, pkg of 200 ea
展开
24758
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/silicone, diam. 11 mm, pkg of 100 ea
展开
509930
与 Rheodyne® 和 Valco® 阀配套使用的 SGE 微量注射器（配有可拆卸针头）, 2.5MDR-LC-GT, volume 2500 μL, needle size 22 ga, needle L × O.D. 2 in. × 0.7112 mm (0.028 in.)
展开
27346
预清洗和组装试剂瓶，100个装, volume 7 mL, amber glass vial
展开
27006
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 4 mL, amber glass vial, O.D. × H 15 mm × 45 mm, tan PTFE/silicone septum
展开
27048-U
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 7 mL, amber glass vial, O.D. × H 17 mm × 60 mm, PTFE/silicone septum
展开
29366-U
中心集液 (CD) 螺纹样品瓶，厚壁，带瓶盖和 PTFE/硅胶隔垫, volume 5 mL, clear glass vial, with graduations, O.D. × H 20 mm × 61 mm, pkg of 12 ea
展开
29112-U
Interseal™ 粘合盖（盖和衬管无法分开）, black cap, PTFE/silicone septa, thread for 10-425
展开
27168
PTFE 瓶盖衬垫, white PTFE liner, diam. × thickness 18 mm × 0.010 in., for use with 15 mL vial, pkg of 100 ea
展开
23182-U
PTFE/硅胶/PTFE 隔垫, red PTFE/silicone/red PTFE, diam. × thickness 8 mm × 1.0 mm, pkg of 1000 ea
展开
507482
PTFE/硅胶隔垫, red PTFE/white silicone, diam. 12 mm, pkg of 100 ea
展开
29063-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, amber glass vial, PTFE/silicone/PTFE septum
SU860170
Septa for Magnetic Screw Caps, white PTFE/blue silicone, diam. × thickness 17 mm × 1.3 mm
展开
27355
Viton® 隔垫, black Viton®, diam. × thickness 22 mm × 0.060 in., for use with 20, 40, or 60 mL vial, pkg of 100 ea
展开
SU860035
11.6×32mm 广口 (6 mm) 钳口样品瓶，容量 1.5mL, clear glass (with marking spot), volume 1.5 mL
展开
29007-U
12×32mm R.A.M.™（9mm 螺纹）广口螺纹口样品瓶, volume 2 mL, clear glass vial (with graduated marking spot), pkg of × 100 ea
展开
27066-U
2mL 12×32mm 棕色玻璃钳口样品瓶, volume 2 mL, amber glass vial (with marking spot), pkg of 100 ea
展开
24708
2mL 标准开口样品瓶的内衬管，4.6mm 内径, volume 0.15 mL, conical polypropylene (with bottom spring), O.D. × H 5 mm × 30 mm, pkg of 100 ea
展开
27249
2mL 卡口样品瓶，12mm×32mm，广口 (6.0mm), volume 2 mL, clear glass vial (with marking spot), pkg of 100 ea
展开
507393
带衬垫的螺纹盖（9mm 螺纹）, black polypropylene cap, red PTFE/silicone septum, pkg of 100 ea
展开
508179
带红色橡胶/PTFE 隔垫的钳口密封盖, seal diam. 11 mm, PTFE/red rubber septum, pkg of 100 ea
展开
SU860078
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 13-425, red PTFE/silicone, septum thickness 1.5 mm, for use with 4 mL vial, pkg of 100 ea
展开
23238
螺纹盖, black phenolic hole cap (with polyseal liner), thread for 20-400, pkg of 144 ea
展开
27500-U
螺纹口带刻度样品瓶，预组装顶部开口瓶盖, volume 4 mL, clear glass vial, thread for 13-425, O.D. × H 15 mm × 45 mm, THERMOSEAL® septum
展开
24710
螺纹口聚丙烯样品瓶, volume 0.75 mL, O.D. × H 12 mm × 32 mm, thread for 8-425, pkg of 1000 ea
展开
27173
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 22 mL, clear glass vial, thread for 20-400, pkg of 100 ea
展开
27115-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 4 mL, amber glass vial, thread for 13-425, pkg of 100 ea
展开
SU861132
塑料短螺纹自动进样器样品瓶, clear polypropylene (with integrated 0.3 mL insert)
展开
33107
小瓶，钳口，血清瓶，288个装, volume 30 mL, clear glass bottle, O.D. × H 36.6 mm × 62.8 mm, pkg of 288 ea
展开
SU860049
斜顶圆底顶空样品瓶, volume 20 mL, clear glass vial, O.D. × H × I.D. 23 mm × 75.5 mm × 12.5 mm, for use with PerkinElmer, pkg of 100 ea
展开
27003
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 15 mL, amber glass vial, O.D. × H 21 mm × 70 mm, thread for 18-400
展开
SU860096
用于固相微萃取的 11mm 钳口密封盖样品瓶, gold seal, magnetic (with 5 mm center hole), red PTFE/white silicone septum, septum diam. × thickness 11 mm × 1.3 mm, for use with CTC PAL and TriPlus autosamplers, pkg of 100 ea
24759
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/silicone, diam. 11 mm, pkg of 1000 ea
展开
27347
预清洗和组装试剂瓶，100个装, volume 15 mL, amber glass vial
展开
27007
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 7 mL, amber glass vial, O.D. × H 17 mm × 60 mm, tan PTFE/silicone septum
展开
27049
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 15 mL, amber glass vial, O.D. × H 21 mm × 70 mm, PTFE/silicone septum
展开
33213
棕褐色 PTFE/硅胶隔垫, white tan PTFE/silicone, diam. × thickness 8 mm × 0.060 in., pkg of 1000 ea
展开
SU860007
棕褐色 PTFE/硅胶隔垫, tan PTFE/silicone, diam. × thickness 22 mm × 3.2 mm, for use with 20, 40, 60mL vial, pkg of 1000 ea
展开
27494
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial, PTFE/rubber septum, pkg of 100 ea
展开
29113-U
Interseal™ 粘合盖（盖和衬管无法分开）, black cap, PTFE/silicone septa (with slit), thread for 10-425
展开
27179
PTFE 瓶盖衬垫, white PTFE, diam. × thickness 21 mm × 0.010 in., for use with 22 mL vial, pkg of 100 ea
展开
27101
PTFE/红色橡胶隔垫, PTFE/red rubber septum, seal diam. 11 mm, pkg of 100 ea, for use with 2mL-2.5mL standard opening crimp top vials
展开
29067-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, amber glass vial (with graduated marking spot), PTFE/red rubber septum
展开
SU860148
Septa for Magnetic Screw Caps, white PTFE/blue silicone, diam. × thickness 17 mm × 1.3 mm
展开
29009-U
12×32mm R.A.M.™（9mm 螺纹）广口螺纹口样品瓶, volume 2 mL, clear glass vial (with graduated marking spot), pkg of 1000 ea
展开
24746
15×45mm 样品瓶的内衬管, volume 0.75 mL, glass, insert type, shell style, , pkg of 200 ea
展开
27229
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, open center, diam. × total thickness × PTFE thickness 20 mm × 3.2 mm × 2 mil, white PTFE/silicone, pkg of 100 ea
展开
854140
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, silver aluminum seal, seal diam. 11 mm, pkg of 100 ea
展开
27019
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 15-425, PTFE/silicone, septum thickness 1.5 mm, for use with 7 mL vial, pkg of 100 ea
展开
27298
顶空样品瓶(透明玻璃材质,斜顶平底), volume 27 mL, O.D. × H 30 mm × 60 mm, pkg of 100 ea
展开
27217
经硅烷化处理螺纹口样品瓶, volume 4 mL, amber glass vial, O.D. × H × I.D. 15 mm × 45 mm × 8 mm, thread for 13-425
展开
24764
开孔聚丙烯螺纹瓶盖, black polypropylene cap, thread for 8-425 cap size, pkg of 1000 ea
23240-U
螺纹盖, black phenolic solid cap (with polyseal liner), thread for 22-400, pkg of 144 ea
展开
27269
螺纹口聚丙烯样品瓶, volume 1 mL, O.D. × H 12 mm × 32 mm, , thread for 10-425, pkg of 100 ea
展开
27184
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 40 mL, clear glass vial, thread for 24-400, pkg of 100 ea
展开
27032
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 4 mL, amber glass vial, thread for 13-425, pkg of 1000 ea
展开
SU860181
塑料短螺纹自动进样器样品瓶, TopSert™, clear polypropylene (with graduations), volume 1.5 mL
展开
33108-U
小瓶，钳口，血清瓶，288个装, volume 50 mL, clear glass bottle, O.D. × H 43 mm × 73 mm, pkg of 36 ea
展开
27297
斜顶圆底顶空样品瓶, volume 20 mL, beveled finish clear glass vial, O.D. × H 22.6 mm × 75 mm, pkg of 1000 ea
展开
27004
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 22 mL, amber glass vial, O.D. × H 23 mm × 85 mm, thread for 20-400
展开
27291
用于 Waters 96 孔转盘的 8×40mm 样品瓶, volume 1 mL, amber glass vial, O.D. × H 8 mm × 40 mm, pkg of 1000 ea
展开
SU860094
用于固相微萃取的 11mm 钳口密封盖样品瓶, silver aluminum seal (with 5.6 mm center hole), red PTFE/white silicone septum, septum diam. × thickness 11 mm × 1.3 mm, pkg of 100 ea
展开
27348
预清洗和组装试剂瓶，100个装, volume 22 mL, amber glass vial
展开
27008
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 15 mL, amber glass vial, O.D. × H 21 mm × 70 mm, tan PTFE/silicone septum
展开
27050-U
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 22 mL, amber glass vial, O.D. × H 23 mm × 85 mm, PTFE/silicone septum
展开
27095-U
棕褐色 PTFE/硅胶隔垫, white tan PTFE/silicone, diam. × thickness 8 mm × 0.060 in., pkg of 100 ea
展开
29114-U
Interseal™ 粘合盖（盖和衬管无法分开）, white cap, PTFE/silicone septa, thread for 10-425
展开
29068-U
R.A.M.™ (9mm) 螺纹口样品瓶，带瓶盖和隔膜的未组装便利套装, volume 2 mL, amber glass vial (with graduated marking spot), PTFE/silicone septum
展开
SU860171
Septa for Magnetic Screw Caps, red PTFE/white silicone, diam. × thickness 17 mm × 1.3 mm
展开
29010-U
12×32mm R.A.M.™（9mm 螺纹）广口螺纹口样品瓶, volume 2 mL, amber glass vial (with graduated marking spot), pkg of × 100 ea
展开
27067-U
2mL 12×32mm 棕色玻璃钳口样品瓶, volume 2 mL, amber glass vial (with marking spot), pkg of 1000 ea
展开
24701
2mL 标准开口样品瓶的内衬管，4.6mm 内径, volume 0.25 mL, clear glass (shell style), O.D. × H 5 mm × 31 mm, pkg of 200 ea
24715
2mL 广口样品瓶的内衬管，6.0mm 内径, volume 0.35 mL, clear glass (shell style), O.D. × H × I.D. 6 mm × 31 mm × 4.6 mm, pkg of 100 ea
展开
27455-U
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, , PTFE/silicone, diam. × total thickness × PTFE thickness 20 mm × 2.5 mm × 5 mil, pkg of 100 ea
展开
27473
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, red aluminum seal, seal diam. 11 mm, PTFE/red rubber septum, pkg of 1000 ea
展开
507407
带衬垫的螺纹盖（9mm 螺纹）, black polypropylene cap, PTFE/silicone/PTFE septum, pkg of 100 ea
展开
27020
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 18-400, PTFE/silicone, septum thickness 1.5 mm, for use with 15 mL vial, pkg of 100 ea
展开
27029-U
经硅烷化处理螺纹口样品瓶, volume 2 mL, clear glass vial, O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, thread for 8-425
展开
27516
螺纹口带刻度样品瓶，预组装顶部开口瓶盖, volume 2 mL, clear glass vial, thread for 8-425, O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, PTFE/silicone septum
展开
27379
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 40 mL, clear glass vial, thread for 24-400, pkg of 100 ea
展开
SU860159
塑料短螺纹自动进样器样品瓶, TopSert™, clear polypropylene (with graduations), volume 1.5 mL
展开
27314
需要 8mm 密封盖的钳口微量样品瓶, volume 0.8 mL, amber glass vial (round bottom), O.D. × H 7 mm × 32 mm, pkg of 100
展开
27182
样品瓶（带PTFE衬里的绿色固体热固性螺旋盖），预组装，100个装, volume 40 mL, amber glass vial, O.D. × H 29 mm × 82 mm, thread for 24-400
展开
SU860016
用于固相微萃取的 11mm 钳口密封盖样品瓶, silver aluminum seal (with 5.6 mm center hole), red PTFE/white silicone septum, septum diam. × thickness 11 mm × 1.3 mm, pkg of 1000 ea
展开
27426
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/silicone (with slit), thread for 11 mm snap ring, pkg of 100 ea
展开
27009-U
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 22 mL, amber glass vial, O.D. × H 23 mm × 85 mm, tan PTFE/silicone septum
展开
27051
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 40 mL, amber glass vial, O.D. × H 29 mm × 82 mm, tan PTFE/silicone septum
展开
29369-U
中心集液 (CD) 螺纹样品瓶，厚壁，带瓶盖和 PTFE/硅胶隔垫, volume 3 mL, amber glass vial, without graduations, O.D. × H 20 mm × 46 mm, pkg of 12 ea
展开
29115-U
Interseal™ 粘合盖（盖和衬管无法分开）, white cap, PTFE/silicone septa (with slit), thread for 10-425
展开
23242-U
PTFE/硅胶隔垫, tan PTFE/silicone septum, septum diam. × total thickness × PTFE thickness 18 mm × 0.060 in. × 2 mil, pkg of 144 ea
展开
SU860149
Septa for Magnetic Screw Caps, red PTFE/white silicone, diam. × thickness 17 mm × 1.3 mm
展开
29011-U
12×32mm R.A.M.™（9mm 螺纹）广口螺纹口样品瓶, volume 2 mL, amber glass vial (with graduated marking spot), pkg of × 1000 ea
27058
2mL 12×32mm 透明玻璃钳口样品瓶, clear glass vial (large opening), pkg of 100 ea
展开
27070-U
2mL 12×32mm 棕色玻璃钳口样品瓶, vial type, standard opening, O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, pkg of 100 ea
展开
24702
2mL 标准开口样品瓶的内衬管，4.6mm 内径, volume 0.25 mL, clear glass (shell style), O.D. × H 5 mm × 31 mm, pkg of 1000 ea
展开
27251
2mL 卡口样品瓶，12mm×32mm，广口 (6.0mm), volume 2 mL, amber glass vial (with marking spot), pkg of 100 ea
展开
27359
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, diam. 8 mm, red PTFE/silicone septum, opening size 3.2 mm, pkg of 100 ea
展开
27103
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, red aluminum seal, seal diam. 11 mm, PTFE/red rubber septum, pkg of 100 ea
展开
507423
带衬垫的螺纹盖（9mm 螺纹）, red polypropylene cap, red PTFE/silicone septum, pkg of 100 ea
展开
27021
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene hole cap, thread for 20-400, PTFE/silicone, septum thickness 1.9 mm, for use with 22 mL vial, pkg of 100 ea
展开
27299
顶空样品瓶(透明玻璃材质,斜顶平底), volume 27 mL, O.D. × H 30 mm × 60 mm, pkg of 1000 ea
展开
27220-U
经硅烷化处理螺纹口样品瓶, volume 4 mL, clear glass vial, O.D. × H × I.D. 15 mm × 45 mm × 8 mm, thread for 13-425
展开
27271
开孔聚丙烯螺纹瓶盖, black polypropylene cap, for use with 2 mL vial (large opening), pkg of × 100 ea
展开
27517
螺纹口带刻度样品瓶，预组装顶部开口瓶盖, volume 4 mL, clear glass vial, thread for 13-425, O.D. × H 15 mm × 45 mm, PTFE/silicone septum
展开
SU860001
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 40 mL, clear glass vial, thread for 24-400, pkg of 100 ea
展开
854986
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 4 mL, amber glass vial, thread for 13-425, pkg of 100 ea
展开
SU860182
塑料短螺纹自动进样器样品瓶, TopSert™, amber polypropylene (with graduations), volume 1.5 mL
展开
508454
斜顶圆底顶空样品瓶, volume 20 mL, clear glass vial, O.D. × H × I.D. 22.7 mm × 75 mm × 12.5 mm, pkg of 125 ea
展开
27010-U
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 40 mL, amber glass vial, O.D. × H 29 mm × 82 mm, tan PTFE/silicone septum
展开
27202-U
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 2 mL, clear glass vial (standard opening - 4.6 mm), PTFE/red rubber septum
展开
29153-U
Interseal™ 粘合盖（盖和衬管无法分开）, black cap, PTFE/silicone, thread for 13-425
展开
27539
PTFE/硅胶隔垫, blue PTFE/white silicone, diam. × thickness 20 mm × 0.75 mm, pkg of 100 ea
27059
2mL 12×32mm 透明玻璃钳口样品瓶, clear glass vial (large opening)
展开
SU860117
2mL 广口样品瓶的内衬管，6.0mm 内径, volume 0.2 mL, shell style (flat bottom)
展开
27381
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, blue aluminum seal, seal diam. 11 mm, PTFE/red rubber septum, pkg of 1000 ea
展开
507415
带衬垫的螺纹盖（9mm 螺纹）, red polypropylene cap, tan PTFE/silicone septum, pkg of 100 ea
展开
27022
带有 PTFE/硅胶隔垫的带孔螺纹盖, black polypropylene cap, thread for 24-400, PTFE/silicone, septum thickness 3 mm, for use with 20, 40, or 60 mL vial, pkg of 100 ea
展开
28304-U
经硅烷化处理螺纹口样品瓶, volume 2 mL, amber glass, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, thread for 9 mm
展开
27414
开孔聚丙烯螺纹瓶盖, white polypropylene hole cap, thread for 10-425, for use with 2 mL large opening vial (6.0 mm), pkg of 100 ea
展开
SU860129
螺纹盖
展开
27518
螺纹口带刻度样品瓶，预组装顶部开口瓶盖, volume 7 mL, clear glass vial, thread for 15-425, O.D. × H 17 mm × 60 mm, PTFE/silicone septum
展开
27270-U
螺纹口聚丙烯样品瓶, volume 1 mL, O.D. × H 12 mm × 32 mm, , thread for 10-425, pkg of 1000 ea
展开
23703-U
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 60 mL, clear glass vial, thread for 24-400, pkg of 144 ea
展开
27116-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 4 mL, amber glass vial (with marking spot), thread for 13-425, pkg of 100 ea
展开
SU860160
塑料短螺纹自动进样器样品瓶, TopSert™, amber polypropylene (with graduations), volume 1.5 mL
展开
27121-U
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 40 mL, amber glass vial, O.D. × H 27.5 mm × 95 mm, tan PTFE/silicone septum
展开
27489
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial, PTFE/silicone/PTFE septum, pkg of 100 ea
展开
27541
PTFE/硅胶隔垫, gray PTFE/silicone, diam. × thickness × PTFE thickness 20 mm × 0.060 in. × 0.010 in., pkg of 100 ea
展开
24716
2mL 广口样品瓶的内衬管，6.0mm 内径, volume 0.35 mL, clear glass (shell style), O.D. × H × I.D. 6 mm × 31 mm × 4.6 mm, pkg of 1000 ea
展开
27252
2mL 卡口样品瓶，12mm×32mm，广口 (6.0mm), volume 2 mL, amber glass vial (with marking spot), pkg of 1000 ea
展开
27104
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, blue aluminum seal, seal diam. 11 mm, PTFE/red rubber septum, pkg of 100 ea
展开
27093-U
带有 PTFE/硅胶隔垫的带孔螺纹盖, black phenolic hole cap, thread for 8-425, PTFE/silicone, septum thickness 1.5 mm, for use with 2 mL screw thead vial, 4.6 mm opening, pkg of 100 ea
SU860177
短螺纹瓶盖，9mm 螺纹，带衬垫, UltraBond, blue polypropylene screw cap (open-top)
展开
27519
螺纹口带刻度样品瓶，预组装顶部开口瓶盖, volume 15 mL, clear glass vial, thread for 18-400, O.D. × H 21 mm × 70 mm, PTFE/silicone septum
展开
27078
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 2 mL, clear glass vial, thread for 8-425, pkg of 100 ea
展开
27117-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 4 mL, amber glass vial, thread for 13-425, pkg of 1000 ea
展开
SU860058
需要 8mm 密封盖的钳口微量样品瓶, volume 0.6 mL, clear glass vial (conical), O.D. × H 7 mm × 40 mm, pkg of × 100 ea
展开
24754
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE liner, diam. 11 mm, pkg of 100 ea
展开
27123-U
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 2 mL, clear glass vial (standard opening - 4.6 mm), O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, PTFE/red rubber septum
展开
29157-U
Interseal™ 粘合盖（盖和衬管无法分开）, white cap, PTFE/silicone, thread for 13-425
展开
27062-U
2mL 12×32mm 透明玻璃钳口样品瓶, clear glass vial (with marking spot), O.D. × H × I.D. 12 mm × 32 mm × 6 mm, large opening, (6 mm), pkg of 100 ea
展开
SU860191
2mL 标准开口样品瓶的内衬管，4.6mm 内径, clear glass (flat bottom), volume 0.2 mL
展开
27375
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, seal diam. 20 mm, open center, white PTFE/silicone septum, pkg of 1000 ea
展开
27413
开孔聚丙烯螺纹瓶盖, yellow polypropylene hole cap, thread for 10-425, for use with 2 mL large opening vial (6.0 mm), pkg of 100 ea
展开
27520-U
螺纹口带刻度样品瓶，预组装顶部开口瓶盖, volume 22 mL, clear glass vial, thread for 20-400, O.D. × H 23 mm × 85 mm, PTFE/silicone septum
展开
27317
螺纹口透明玻璃样品瓶, volume 1.1 mL, vial O.D. × H 12 mm × 32 mm, thread for 8-425, pkg of × 100 ea
展开
27079
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 2 mL, clear glass vial, thread for 8-425, pkg of 1000 ea
展开
27075-U
钳口盖样品瓶, volume 0.1 mL, polypropylene, closure type, crimp top vial, O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, pkg of 100 ea
展开
24755
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE liner, diam. 11 mm, pkg of 1000 ea
展开
508616
PTFE/硅胶隔垫, blue PTFE/silicone, diam. × thickness 20 mm × 0.045 in., hardness 30 (Durometer: shore A), pkg of 100 ea
展开
27063
2mL 12×32mm 透明玻璃钳口样品瓶, pkg of 1000 ea, clear glass vial (with marking spot)
展开
SU860169
2mL 标准开口样品瓶的内衬管，4.6mm 内径, clear glass (flat bottom), volume 0.2 mL
507458
带衬垫的螺纹盖（9mm 螺纹）, yellow cap, tan PTFE/silicone septum, pkg of 100 ea
展开
SU860092
短螺纹瓶盖，9mm 螺纹，带衬垫, blue polypropylene cap (with 6 mm center hole), red PTFE/white silicone septum, pkg of 100 ea
展开
27521
螺纹口带刻度样品瓶，预组装顶部开口瓶盖, volume 40 mL, clear glass vial, O.D. × H 29 mm × 82 mm, thread for 24-400, PTFE/silicone septum
展开
27265
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 2 mL, clear glass vial, thread for 10-425, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, pkg of 100 ea
展开
27072-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 7 mL, amber glass vial, thread for 15-425, pkg of 100 ea
展开
33217-U
钳口盖样品瓶, volume 0.1 mL, polypropylene, vial type, conical, pkg of 1000 ea
展开
27147
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 7 mL, clear glass vial, O.D. × H 17 mm × 60 mm, PTFE/red rubber septum
展开
27040-U
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 2 mL, amber glass vial (standard opening - 4.6 mm), PTFE/red rubber septum
展开
SU860005
Interseal™ 粘合盖（盖和衬管无法分开）, white polypropylene cap (15mm center hole), tan PTFE/silicone, thickness 3.2 mm, thread for 24-400, for use with 20 or 40 mL vial, pkg of 1000 ea
展开
27237-U
PTFE/硅胶隔垫, transparent PTFE/silicone, diam. × thickness × PTFE thickness 20 mm × 0.100 in. × 10 mil, pkg of 100 ea
展开
27452
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal (open center), seal diam. 13 mm, PTFE/silicone septum, pkg of 100 ea
展开
27102-U
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, silver aluminum seal, diam. × thickness 11 mm × 1.0 mm, opening 4.8 mm
展开
SU860019
短螺纹瓶盖，9mm 螺纹，带衬垫
展开
27318
螺纹口透明玻璃样品瓶, volume 1.1 mL, O.D. × H 12 mm × 32 mm, thread for 8-425
展开
27266
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 2 mL, clear glass vial, thread for 10-425, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, pkg of 2000 ea
展开
33109-U
小瓶，钳口，血清瓶，288个装, volume 50 mL, clear glass bottle, O.D. × H 43 mm × 73 mm, pkg of 272 ea
展开
27158
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 15 mL, clear glass vial, O.D. × H 21 mm × 70 mm, PTFE/red rubber septum
展开
27495
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial, PTFE/silicone/PTFE septum, pkg of 100 ea
展开
SU860006
Interseal™ 粘合盖（盖和衬管无法分开）, white polypropylene cap (solid), tan PTFE/silicone (EPA Quality), thickness 3.2 mm, thread for 24-400, for use with 20 or 40mL vial, pkg of 100 ea
展开
27250-U
2mL 卡口样品瓶，12mm×32mm，广口 (6.0mm), volume 2 mL, clear glass vial (with marking spot), pkg of 1000 ea
508489
带 PTFE/硅胶隔垫的钳口密封盖, aluminum seal (open center), diam. × thickness 20 mm × 2.9 mm, PTFE/silicone (blue silicone), Chromacol 20-AC-ST3, pkg of 100 ea
展开
854980-U
带 PTFE/橡胶隔垫的 11mm 钳口密封盖, silver aluminum seal, opening size 5.5 mm, diam. × thickness 11 mm × 1.0 mm, septum (TFE/butyl/red rubber), pkg of × 1000 ea
展开
SU860079
短螺纹瓶盖，9mm 螺纹，带衬垫, blue polypropylene cap, red PTFE/silicone/red PTFE septum, septum diam. × thickness 9 mm × 1.0 mm, pkg of 100 ea
展开
27111
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 4 mL, clear glass vial, thread for 13-425, O.D. × H × I.D. 15 mm × 45 mm × 8 mm, pkg of 100 ea
展开
33110-U
小瓶，钳口，血清瓶，288个装, volume 100 mL, clear glass bottle, O.D. 51.7 mm × H (94.5 mm), pkg of 36 ea
展开
27011
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 2 mL, amber glass vial (standard opening - 4.6 mm), O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, PTFE/red rubber septum
展开
27236
PTFE/硅胶隔垫, tan PTFE/silicone septa, diam. × thickness × PTFE thickness 20 mm × 0.125 in. × 2 mil, pkg of 100 ea
展开
27068-U
2mL 12×32mm 透明玻璃钳口样品瓶, clear glass vial, vial type, standard opening, pkg of 100 ea
展开
SU860119
带 PTFE/硅胶隔垫的钳口密封盖, Ultra-clean, gold aluminum (with 5.5 mm center hole), diam. × thickness 11 mm × 1.3 mm, red PTFE/white silicone
展开
27053
开孔聚丙烯螺纹瓶盖, black polypropylene cap, thread for 13-425, for use with 4 mL vial with 13-425 thread, pkg of 100 ea
展开
27031
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 4 mL, clear glass vial, thread for 13-425, O.D. × H × I.D. 15 mm × 45 mm × 8 mm, pkg of 1000 ea
展开
33111-U
小瓶，钳口，血清瓶，288个装, volume 100 mL, clear glass bottle, O.D. × H 51.7 mm ( ) × 94.5 mm, pkg of 144 ea
展开
27044-U
预组装螺纹口样品瓶，带聚丙烯顶部开口瓶盖, volume 22 mL, amber glass vial, O.D. × H 23 mm × 85 mm, PTFE/red rubber septum
展开
27498
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial (with marking spot), PTFE/silicone/PTFE septum, pkg of 100 ea
展开
23245-U
PTFE/硅胶隔垫, PTFE/silicone, septum diam. × thickness 22 mm × 0.100 in., pkg of 144 ea
展开
SU860120
带 PTFE/硅胶隔垫的钳口密封盖, Ultra-clean, diam. × thickness 11 mm × 1.3 mm, green aluminum (with 5.5 mm cemtre hole), red PTFE/white silicone
展开
29043-U
带衬垫的螺纹盖（9mm 螺纹）, black polypropylene cap, red rubber/PTFE septum, pkg of 100 ea
展开
27054
开孔聚丙烯螺纹瓶盖, black polypropylene hole cap, for use with 7 mL vial with 15-425 thread, pkg of 100 ea
展开
507369
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 1.5 mL, clear glass vial, thread for 8-425, O.D. × H × I.D. 12 mm × 30 mm × 4.6 mm, pkg of 100 ea
展开
27088-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 15 mL, amber glass vial, thread for 18-400, pkg of 100 ea
27013
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 7 mL, amber glass vial, O.D. × H 17 mm × 60 mm, PTFE/red rubber septum
展开
27542
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial, PTFE/silicone septum, pkg of 1000 ea
展开
SU860121
带 PTFE/硅胶隔垫的钳口密封盖, Ultra-clean, blue aluminum (with 5.5 mm center hole), diam. × thickness 11 mm × 1.3 mm, red PTFE/white silicone
展开
29044-U
带衬垫的螺纹盖（9mm 螺纹）, blue polypropylene cap, red rubber/PTFE septum, pkg of 100 ea
展开
27056
开孔聚丙烯螺纹瓶盖, black polypropylene hole cap, for use with 22 mL vial with 20-400 thread, pkg of 100 ea
展开
27057
开孔聚丙烯螺纹瓶盖, black polypropylene hole cap, for use with 20, 40, or 60 mL vial with 24-400 thread, pkg of 100 ea
展开
507377
螺纹口透明玻璃样品瓶（仅样品瓶）, volume 1.5 mL, clear glass vial, thread for 8-425, O.D. × H 12 mm × 30 mm, pkg of 1000 ea
展开
854991
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 20 mL, amber glass vial, thread for 24-400, pkg of 1000 ea
展开
27014-U
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 15 mL, amber glass vial, O.D. × H 21 mm × 70 mm, PTFE/red rubber septum
展开
27548-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial (with marking spot), PTFE/silicone septum, pkg of 1000 ea
展开
SU860122
带 PTFE/硅胶隔垫的钳口密封盖, Ultra-clean, red aluminum (with 5.5 mm center hole), diam. × thickness 11 mm × 1.3 mm, red PTFE/white silicone
展开
29045-U
带衬垫的螺纹盖（9mm 螺纹）, natural polypropylene cap, red rubber/PTFE septum, pkg of 100 ea
展开
27272-U
开孔聚丙烯螺纹瓶盖, black polypropylene cap, for use with 2 mL large opening (6.0 mm) vial with 10-425 thread, pkg of × 1000 ea
展开
27073-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 22 mL, amber glass vial, thread for 20-400, pkg of 100 ea
展开
27449
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/silicone, diam. 13 mm, , pkg of 100 ea
展开
27015
预组装螺纹口样品瓶，带酚醛树脂顶部开口瓶盖, volume 22 mL, amber glass vial, O.D. × H 23 mm × 85 mm, PTFE/red rubber septum
展开
27549-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial (with marking spot), PTFE/silicone septum, pkg of 1000 ea
展开
27185-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 40 mL, amber glass vial, thread for 24-400, pkg of 100 ea
展开
27223
带 PTFE/橡胶隔垫的钳口密封盖, seal diam. 13 mm, , PTFE/rubber septum, pkg of 100 ea
展开
29047-U
带衬垫的螺纹盖（9mm 螺纹）, blue polypropylene cap, PTFE/silicone septum, pkg of 100 ea
27382
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 40 mL, amber glass vial, thread for 24-400, pkg of 100 ea
展开
27360-U
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, diam. × thickness 11 mm × 1.0 mm, red PTFE/silicone septum, pkg of × 100 ea
展开
29048-U
带衬垫的螺纹盖（9mm 螺纹）, natural polypropylene cap, PTFE/silicone septum, pkg of 100 ea
展开
27551
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial (with marking spot), PTFE/red rubber septum, pkg of 1000 ea
展开
29149-U
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, diam. × thickness 11 mm × 1.0 mm, Seal 2000, pkg of 100 ea
展开
27451
带 PTFE/橡胶隔垫的钳口密封盖, seal diam. 13 mm, , PTFE/rubber septum, pkg of 1000 ea
展开
23702-U
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 40 mL, amber glass vial, thread for 24-400 24-400, pkg of 100 ea
展开
SU860060
需要 8mm 密封盖的钳口微量样品瓶, volume 0.7 mL, clear glass vial (flat bottom), O.D. × H 7 mm × 40 mm
展开
24760-U
用于卡口样品瓶的瓶盖, polypropylene seal, PTFE/silicone/PTFE, thread for 11 mm snap ring, pkg of 100 ea
展开
SU860108
用于卡口样品瓶的瓶盖, diam. × thickness 11 mm × 1.0 mm
展开
29151-U
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, diam. × thickness 11 mm × 1.0 mm, Seal 2000, pkg of 1000 ea
展开
27454-U
带 PTFE/橡胶隔垫的钳口密封盖, seal diam. × thickness 20 mm × 3.0 mm, , PTFE/rubber septum, pkg of 100 ea
展开
29051-U
带衬垫的螺纹盖（9mm 螺纹）, blue polypropylene cap, PTFE/silicone septum (with slit), pkg of 100 ea
展开
SU860023
需要 8mm 密封盖的钳口微量样品瓶, volume 0.7 mL, clear glass vial (flat bottom), O.D. × H 7 mm × 40 mm, pkg of 1000 ea
展开
SU860113
用于卡口样品瓶的瓶盖, cap size 11 mm, clear polyethylene (with 6.0 mm hole), blue PTFE/white silicone (with slit)
展开
27488-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial, PTFE/rubber septum, pkg of 100 ea
展开
33274-U
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, PTFE/silicone septum, diam. × thickness 8 mm × 1.0 mm
展开
27228
带 PTFE/橡胶隔垫的钳口密封盖, seal diam. × thickness 20 mm × 3.2 mm, , PTFE/red rubber septum, pkg of 100 ea
展开
29052-U
带衬垫的螺纹盖（9mm 螺纹）, natural polypropylene cap, PTFE/silicone septum (with slit), pkg of 100 ea
展开
33273-U
带 PTFE/硅胶隔垫的钳口密封盖, silver aluminum seal, PTFE/silicone septum, diam. × thickness 8 mm × 1.0 mm
29053-U
带衬垫的螺纹盖（9mm 螺纹）, black polypropylene cap, PTFE/silicone/PTFE septum, pkg of 100 ea
展开
27080-U
螺纹口透明玻璃样品瓶, , volume 2 mL, vial O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, thread for 8-425, pkg of × 100 ea
展开
SU860002
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 40 mL, amber glass vial, thread for 24-400, pkg of 1000 ea
展开
27491-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial (with marking spot), PTFE/red rubber septum, pkg of × 100 ea
展开
29054-U
带衬垫的螺纹盖（9mm 螺纹）, blue polypropylene cap, PTFE/silicone/PTFE septum, pkg of 100 ea
展开
SU860061
需要 8mm 密封盖的钳口微量样品瓶, volume 0.7 mL, amber glass vial, O.D. × H 7 mm × 40 mm , flat bottom, pkg of 100 ea
展开
27550-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial (with marking spot), PTFE/red rubber septum, pkg of 1000 ea
展开
29046-U
带衬垫的螺纹盖（9mm 螺纹）, black polypropylene cap, PTFE/silicone septum, pkg of 100 ea
展开
27081-U
螺纹口透明玻璃样品瓶, , volume 2 mL, O.D. × H × I.D. 12 mm × 32 mm × 4.6 mm, thread for 8-425, pkg of 1000 ea
展开
SU860180
用于卡口样品瓶的瓶盖, blue polyethylene cap, septum diam. × thickness 11 mm × 1.0 mm
展开
27497-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, amber glass vial (with marking spot), PTFE/rubber septum, pkg of 100 ea
展开
29049-U
带衬垫的螺纹盖（9mm 螺纹）, black polypropylene cap, PTFE/silicone septum (with slit), pkg of 100 ea
展开
SU860004
螺纹口样品瓶，棕色玻璃（仅样品瓶）, volume 60 mL, amber glass vial, thread for 24-400, pkg of 1000 ea
展开
24738-U
需要 8mm 密封盖的钳口微量样品瓶, volume 0.8 mL, clear glass vial, O.D. × H 7 mm × 40 mm , flat bottom, pkg of 200 ea
展开
27546-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial, PTFE/silicone/PTFE septum, pkg of 1000 ea
展开
27492-U
ABC口服液体制剂瓶，2毫升，预组装，9毫米螺纹, clear glass vial (with marking spot), PTFE/silicone/PTFE septum, pkg of 100 ea
展开
SU860143
带衬垫的螺纹盖（9mm 螺纹）, PTFE/silicone (with slit)
展开
SU860179
带衬垫的螺纹盖（9mm 螺纹）, blue polypropylene screw cap (open-top), PTFE/red rubber septum
展开
SU860190
带衬垫的螺纹盖（9mm 螺纹）, Ultra Clean, thickness 1.0 mm, blue polypropylene (solid top cap)
展开
SU860133
螺纹口透明玻璃样品瓶, volume 1.5 mL
508578
20mm 氯丁基橡胶/PTFE 隔垫，52 硬度计，一包 100 个, PTFE/rubber (chlorobutyl), diam. × thickness 20 mm × 0.150 in., hardness 52 (Durometer: shore A)
展开
27338
用于 5×31mm 内衬管的自定心支架, Self-centering support for 5 x 32 mm insert, for use with conical insert (Cat. No. 24703 and 24704), pkg of 500 ea
展开
SU860107
用于固相微萃取的样品瓶架, Acrylic Vial Rack for SPME Vial, L × W × H 160 mm × 160 mm × 30 mm, 25 cavities, cavity diam. 24 mm
展开
33310-U
Mininert® 阀的备用隔垫, Replacement Mininert Septa, L × O.D. 0.308 in. × 3.175 mm (0.125 in.), pkg of 50 ea
展开
508195
Vial crimp seal with Red Rubber/PTFE Septum, seal diam. 11 mm, red aluminum seal, PTFE/red rubber septum, hardness 38 (Durometer: shore A), pkg of 100 ea
上海辅泽商贸有限公司
实名认证
金牌会员
入驻年限：7年
